Tape; Listening To A Cassette; Cd Synchro Record Feature; Recording A Compact Disc - Samsung AH68-01145B Instruction Manual

Listening to a Cassette

Always treat your cassettes with care; refer, if necessary, to
the section entitled "Precautions When Using Audio Cassettes"
on page 27.
1
Switch the system on by pressing the Standby/On button.
2
Select the TAPE function by pressing TAPE on the front panel.
3
Open either cassette deck 1 or 2 by pushing and releasing the deck
cover where PUSH EJECT ( ) is written.
4
Insert the pre-recorded cassette with the open edge of the tape
facing downward.
5
Close the deck by pushing on it until it clicks into place.
Result: Depending on the deck selected, the 1 or 2 indication is
displayed in front of the counter number.
6
If you have inserted two cassettes, press Deck 1/2 on the front panel
or directly the Deck 1/2 button on the remote control to select the
cassette to be played.
Result: Depending on the deck selected, the TAPE 1 or TAPE 2
indication is displayed.
7
To listen to... Press ...
Side A

TAPE (

Side B TAPE (
Result: The cassette starts playing.
8
When the cassette is stopped, select one of the following functions
as required.
Main Unit
To...
Rewind the cassette
Fast-forward the cassette
Remote Control
To...
Rewind the cassette
Fast-forward the cassette
1
8
2,7
) once DECK 1 and DECK 2
) twice DECK 2 only
Press...
Press ...
6
8

CD Synchro Record Feature

You can record a compact disc on a cassette in two different ways:
Synchronised recording
Direct recording
This feature enables you to synchronize the start of the
recording with the start of the disc or track of your choice.
1
Switch the system on by pressing Standby/On.
2
Insert a blank cassette in Deck 2.
3
Select the VCD/CD function by pressing VCD/CD on the front panel.
4
Load a compact disc.
5
Select the required disc.
6
Select the required track and press CD Synchro or press
CD Synchro directly to start recording at the beginning of the disc.
Result: REC is displayed and recording starts.
7
To stop recording, press .
3
1

Recording a Compact Disc

The direct recording mode enables you to start recording with
any track on the compact disc.
You can only record on cassettes in Deck 2.
You do not need to adjust the volume, as it has no effect on the recording.
1
Switch your system on by pressing Standby/On.
2
Insert a blank cassette in Deck 2.
3
Select the VCD/CD function by pressing VCD/CD on the front panel.
4
Load the compact disc.
5
Select the required disc.
6
Select the required track on the compact disc and press
panel or on the remote control to set the compact disc player to Pause
mode.
7
Press the REC/Pause.
Result: REC is displayed.
8
Press the to start playing the track.
Result: The track is recorded on the cassette.
9
To stop recording, press .
3,6,8
7
1
7
6
on the front
9
21
GB