Setting The Test Tone; Setting The Drc (Dynamic Range Compression) - Samsung HT-THQ22 Instruction Manual

Setting the Test Tone

Use the Test Tone feature to check the speaker connections.
In Stop or no
Press Cursor
1 2
ton to move to 'Audio'
disc mode,
and then press
press MENU
ENTER button.
button.
MOVE
MOVE ENTER EXIT
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Alternative method: press the TEST TONE button on the remote.
Press TEST TONE button.
•
Test tone will be produced as follows:
When playing a DVD or CD, this will work only in Stop mode.
•
Use this function to check that each speaker is correctly con-
nected and that there is no problem.
To end the test tone,
press TEST TONE button again.
53
but- Press Cursor
3
to move to 'TEST
TONE' and then press
ENTER button.
•
The test tone will be sent to L
R SR SL SW in order.
If the ENTER button is pressed again
at this time, the test tone will stop.
ENTER EXIT
MOVE ENTER RETURN
STOP
L: Front Speaker (L) C: Center Speaker SW: Subwoofer
R: Front Speaker (R) SL: Rear Speaker (L) SR: Rear Speaker (R)
Multi-Channel Pro Logic Mode
Start
Setting the DRC
This feature balances the range between the loudest and quietest sounds.
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
button
C
EXIT
EXIT
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
(Dynamic Range Compression)
Press Cursor
1 2
In Stop or no disc
button to move to
mode, press
'Audio' and then
MENU button.
press ENTER
button.
MOVE ENTER EXIT MOVE
Press Cursor
3 4
Press Cursor
button to move to
'DRC' and then
the 'DRC'.
press ENTER
button.
•
When the Cursor
the effect is greater, and when the
Cursor button is pressed, the effect
is smaller.
MOVE ENTER RETURN CHANGE
EXIT
GB
ENTER EXIT
, to adjust
button is pressed,
RETURN EXIT
54