Yakima BigStack Installation Instructions Manual page 6

install sks loCks
aCCording to loCk
instruCtions
(Purchased separately).
bow stern tie down attaChMent
Attach buckle strap to boat.
Attach strap to grab handle or
rescue bar and pull tight.
Slide plastic tube to protect vehicle
at contact point.
NOTE: Twisting the strap will
help reduce wind vibration.
Insert end of plain strap
into buckle.
Attach hook to plain
strap loop.
(press tab)
Failure to secure front and rear of long loads to ends of vehicle
can result in property damage, personal injury, or death.
Lines on adjustment knob and BigStack
base must be aligned to lock.
Hook the strap to a metal
surface on the bumper, tow
loop, or frame hole using
hook.
Adjust strap tension by
pulling plain end.
• Apply even
pressure to front
and rear straps.
• Bind up and tie off
any excess strap.
Align