Technical Support - Monoprice MP Strata Vacuum 2.0 User Manual

Left and right wheels and right side
L0xB
brushes overloaded
L0xC Left and right side brushes overloaded
Left wheel and left and right side brushes
L0xD
overloaded
Right wheel and left and right side brushes
L0xE
overloaded
Left and right wheels and left and right
L0xF
side brushes overloaded
Notes:
1. If the display shows L000, there is no problem. Reset the vacuum by turning in
off then back on.
2. Replace the x in the above codes with whichever number is shown on the LED
display.
3. If the display shows E001 or E004, refer to both the Exx1 and Exx4 rows.
4. If the display shows EC07, refer to both the ECxx and Exx7 rows.
5. If the display shows EE91, refer to both the Exx1 and Ex9x rows.
6. If the suggested solution does not solve the problem, reset the vacuum by
turning it off then back on.

TECHNICAL SUPPORT

Monoprice is pleased to provide free, live, online technical support to assist you with
any questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come
online to talk to one of our friendly and knowledgeable Tech Support Associates.
Technical support is available through the online chat button on our website
www.monoprice.com during regular business hours, 7 days a week. You can also get
assistance through email by sending a message to tech@monoprice.com
Check if it is stuck or
obstructed by obstacles
29