Item
Group icon
Operation mode display
Set temperature display
Room temperature
display
(2) Ventilator (Lossnay) group operation condition
ON
Schedule set
Note: When connecting multiple AG-150A controllers by connecting an Expansion Controller to the
system, "Schedule set" and "Energy saving" will be displayed only on the AG-150A controller that is
executing these functions.
(3) Hot water supply group operation condition
ON
Schedule set
(4) General equipment group operation condition
ON
Note: Other than lighting icons, pump or card key icons are also available.
The operation mode is displayed here.
The set temperature is displayed here.
Note: The water temperature setting will be displayed for the hot water supply group.
The temperature of the indoor unit's intake is displayed here.
Note: Because the temperature displayed here is of the indoor unit's intake, it could be different from the
actual room temperature.
Note: The current water temperature will be displayed for the hot water supply group.
Note: The temperature display can be in either Celsius (°C) or Fahrenheit (°F) depending on the setting.
Description
OFF
Error
Energy saving
OFF
Error
Energy saving
OFF
Error
11
Filter sign
Check water
Schedule set