Samsung SNC-B5399 User Manual page 67

To setup the record
1. Click <Event> - <Record setup>.
The Record setup window appears.
2. To complete the setting, click the
[Apply] button.
The settings are saved.
SD card : Enables you to verify data
saved on the SD memory card and
format the memory card itself. It
is possible to set to automatically delete movie clips recorded before a certain
period of time (e.g. 1 week, 1 month, or 1 year).
Options : Determine whether or not you wish to receive Email notifi cation of
insuffi cient capacity warnings.
To set an alarm image
You can configure to send message via FTP/E-mail (SMTP) or to save recording into the
SD memory card.
Select a transfer method when an event occurs or the schedule transfer function is activated.
1. Select <Event> - <Alarm image>.
The Alarm Image setup window
appears.
Transfer mode : You can select
alarm message notifi cation method
among FTP/E-mail transfer and SD
Card recording.
- FTP transfer : The image is sent to
the specifi ed FTP address.
- E-mail transfer : The image is sent to the specifi ed email address.
- SD Card Record : Saves images into the SD memory card.

M
If an SD memory card is not inserted, the corresponding button will be disabled.
In this case, insert the SD memory card into the slot and refresh to enable the button.

J
If the SD memory card is ejected while the button is checked, the camera automatically
restarts.
Transferred image naming setup : You can set the fi le name of an alarm image
to be sent when an alarm is triggered or during the scheduled transfer.
Pre/post alarm image : You can set to save the pre or post alarm image.
- Number of image : The frame rate per second can be one among 1, 2, 3, and 5.
- Pre-alarm duration : The pre alarm duration can be one among 5 seconds, 10
seconds, 15 seconds, and 30 seconds. You can send a pre-alarm image of up
to 30 seconds before the alarm is triggered.
(The max time differs, depending on the frame rate)
English _67