Samsung SNC-B5399 User Manual page 29

CAMERA SETUP
You can configure the general settings of the camera module.
For selecting and saving each menu item, refer to "How to use the menu key". (page 27)
CAMERA ID
Provide the ID and position for a camera that displays on the screen.
1. Select <CAMERA SET> - <CAMERA ID>.
Use the four direction ( ▲▼◄ ► ) buttons to
2.
select a desired character.
In the lower input box of the screen, the
selected character will be entered.

You can enter up to 54 characters including alphabets,
numbers and special characters.
3. When done, continue to select <LOCATION>
to specify the display position of the camera ID.
IRIS
You can set the iris to control the intensity of radiation incoming to the camera.
1. Select <CAMERA SET> - <IRIS>.
Use the left/right ( ◄ ► ) buttons to select
2.
<ALC>.
ALC : Controls the luminance automatically.
- LEVEL : Select the global brightness level.
- BACKLIGHT : Select WDR or BLC.
- WDR : Defi ne the composition for weight
factor, the shutter speed in WDR level, and
select outdoor or indoor for white balance
setup.
- BLC (Backlight compensation) : Confi gure the backlight compensation area by
defi ning the area size and location.

M
If the iris is set to <ALC>, fi xing the iris is your priority when you adjust AE and the shutter speed.
CAMERA ID CAMERA ID
ABCDEFGHIJKLMNOPQRSTUVWXYZO BCDEFGHIJKLMNOPQRSTUVWXYZO
_ _
123456789 123456789 : ? : ? + +
*()/ *()/
SP►► ◄◄ SP SP► ► ◄ ◄ SP LOCATION LOCATION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
ALC ALC
[ 00 ] ---- I ----
LEVEL
BACKLIGHT BACKLIGHT
English _29
OFF OFF