Table of Contents
Advertisement
3 Select the Scan To destination. Use the up and down
4 Press Start.
Note:
Scanning to a folder
Note:
Scanned file names
arrow buttons to cycle through the available choices.
For a full description of the scan destinations, see
below.
The A3000 will then contact your computer and
perform the scan.
If you have not scanned or copied any documents within the
previous 30 minutes, there will be a delay of approximately
one minute while the scanner warms up. Otherwise, the scan
will proceed immediately.
You can scan to a folder, scan to email, or scan to an
application, as explained in the following sections.
The first Scan To destination is your User Folder. This
is initially your My Pictures folder, located in your
My Documents directory. You can change your user
folder and default file type with the Settings Utility.
Simply press the Scan button twice to scan your document to
your User Folder, using the settings you selected with the
Settings Utility.
Once scanned, scanned files will be given the filename
of
Month-Day-###.ext
number of the image scanned that day. For example,
the second image scanned on August 5 would be
named
Aug-05-002.JPG
The file extension depends on the file type selected for
your scan.
, where
indicates the
###
.
•
•
35
Scanning
•
•
•
Advertisement
Table of Contents
