. Align the SAMSUNG logo on the Housing and the FRONT label of the Holder Housing so
that they face the same direction, and insert the � Guides of the Housing into the Guide Hole
of the Holder Housing. Turn the Housing counter clockwise by approximately 20 degrees.
Finally, fasten the � screws (M4xL10).
- Make sure not to let the Gasket loose from the Housing.
(If the Gasket is loose, the product is not properly waterproof.)
7
-C7433_7435-Eng.indd27
HOLDER HOUSING
HOUSING
HOLDER HOUSING
GUIDE HOLE
HOUSING
SCREW
"A"
"B"
GASKET
GUIDE HOLE
GUIDE
GUIDE
HOUSING
SCREW
2008-05-20오전1