Table of Contents
Advertisement
Setting the IP router Example (Netgear model RP614v2)
1. Access
1. Open the internet browser and enter http://192.168.0.1 in the address
and press enter.
2. User Name: Enter the "admin".
Password: Enter the password
3. Click the "OK".
2. Setting the internet connection
2-1 ADSL
5-6
1. Select the "Setup Wizard" and press the "Basic Settings".
2. In case of using ADSL, select "Yes".
3. In case of demanding Account Name and Domain Name when
accessing the internet, enter the provided contents from ISP
(Internet Service Provider).
4. Enter the user name and password.
5. Select the "Get automatically from ISP".
6. Press the "Apply" button.
2-2 Cable
1. Select the "Basic Settings" in Setup Wizard.
2. Select "No" in case of Cable Modem.
3. Enter the Account Name and Domain Name only when ISP (Internet
Service Provider) demands.
4. Select the "Get Dynamically from ISP".
5. Select the "Get Automatically from ISP".
6. Select the "Use Default Address".
7. Press the "Apply" Button.
N N
o o
t t
e e
Contact the network manager about IP Address/Subnet Mask/
N N
o o
t t
e e
Gateway.
E
5-7
Advertisement
Table of Contents
