Samsung SCC-C6475(P) Owner's Instructions Manual page 21

I
Accessing SCC-C6475(P) by using the internet browser, Log In page as
follow appears.
User ID to Log In is set to a basic value 'root' when it was shipped and
-
the password is '4321'.
I
Log in at SCC-C6475(P) and the main screen that user can see images
appears.
I
After checking if the camera image works well, click the setup mode button
in the right up side of the main screen.
3-13
I
Move the SCC-C6475(P) setup mode to the Basic Configuration
I
Check if the setting value that user has entered the setting value by using
the IP Installer program in the IP Configuration item is saved safely.
- DNS Server setting is assigned as the basic value '168.126.63.1'. User
can change the setting value when needed.
I
Assign IP Type as 'Static IP' in the Connection Configuration, and assign
Connection Type as 'IP Router + LAN'.
- In case that the Connection Configuration is not set for the user's
network environment, the access cannot be done or the image cannot
be appeared smoothly.
I
Set RTSP Control port, TCP Streaming port, UDP Streaming port, and
Upload port. Each port is the access port that SCC-C6475(P) network
program is using, in case that several SCC-C6475(P) is connected to one
IP router, SCC-C6475(P) port should be set differently.
G RTSP Control port: Port to control the image sending. The basic value
is set 554(TCP).
TCP Streaming port: Port to send the image by using the TCP process.
G
The basic value is set 555 (TCP).
G UDP Streaming port : Port to send the image by using the UDP
process. The basic value is set
8000~8009(UCP).
G Upload port: Port to upgrade S/W. The basic value is set 556(TCP).
© IP page.
E
3-14