Scene - MDT BE-02001.01 Technical Manual

Technical Manual Universal Interface BE

4.5.2 Scene

The scene function calls scenes, which are saved in actuators. Scene numbers in the universal
interface and the actuators must be identical. It is possible to save scenes by a long keystroke if the
saving function was activated.
The following illustration shows the setting options for this parameter:
Figure 15: Parameter Scene
The following chart shows the dynamic range of this parameter:
Sub-function
Saving function
Scene number
Blocking object
Table 26: Sub-function scene
The chart shows the communication objects for this parameter:
Number Name
2 Scene
Table 27: Communication object Parameter scene
The scene function calls scenes, which were stored in actuators. Scenes contain of parameterized
states of several actuators, which can be called with only one keystroke by using the scene function.
Additional to the call of scenes, scenes can be saved at the call of a universal interface by a long
keystroke. When the saving function was activated, a long keystroke at the universal interface saves
the current state of the actuators to the depending scene.
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
32
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
Dynamic range
[default value]

No save

Save
1-64
[1]

Inactive

Active
Length Usage
1 Byte calls the depending scene
comment
Saving function is selected ba a
long keystroke
Scene number must be
identical with the one in the
actuators
have a look at 4.3.1 blocking
object