MDT BE-02001.01 Technical Manual page 26

Technical Manual Universal Interface BE
4.5.1.3 Send Status
By using the sub-fu tio „"e d status the i put se ds al a s the pa a ete ized sig al fo the
corresponding edge. The following window is shown for the sub-fu tio
Figure 12: Sub-function send status
These settings are available:
ETS-text
Value for rising edge
Value for falling edge
Send cyclic
Time interval for send cyclic
Behavior at bus power up
Table 17: Parameter Send status
The corresponding communication object is shown at the following chart:
Number Name
0 Switch
Table 18: Communication object send status
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
26
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
Dynamic range
[default value]

On

Off

On

Off

Off

On
1-3000s
[1]

send nothing

send status
Length Usage
1 Bit Switching function; no differences between
long and short keystroke
"e d status :
comment
switches on/off at a rising edge
switches on/off at a falling edge
switches the cyclic sending
on/off
Time between two sending
processes
defines the behavior at a bus
power up