Samsung SCC-B2335 User Manual page 19

mode. When it gets brighter back, the mode will
switch to the fi xed high speed electronic shutter
o
mode.
be
However, the auto high speed shutter operates
properly only in a camera featuring a DC or VIDEO
lens.
FAST]
In external high speed electronic shutter (EXT)
mode, you can select one of 8 modes from OFF
gth
through 1/100(PAL:1/120) to 1/10K for the high
otion.
speed electronic shutter. It works as the high
et
speed electronic shutter. You can select an
option using SHUTTER(S0), SHUTTER(S1) and
RM,
SHUTTER(S2) on the rear.
Connect each of the terminals to GND.
ntrast
a
See the below table for the operation.
tion.
o
R.
UTO
0,

Note :
–
d
–
/120)
r,
–
ect.
es
–
ast
e
LC
How to use OSD Menu
SHUTTER(S0) SHUTTER(S1) SHUTTER(S2)
OFF
(NTSC: 1/60, OFF OFF
PAL:1/50)
1/100
ON OFF
(PAL:1/120)
1/250 OFF ON
1/500 ON ON
1/1000 OFF OFF
1/2000 ON OFF
1/4000 OFF ON
1/10K ON ON
If IRIS mode is set to ELC, the SHUTTER menu will be
deactivated as you adjust the brightness using the
electronic shutter.
If the SENS-UP function is set to AUTO, only items of
OFF and AUTO are available in the SHUTTER menu.
If the SENS-UP mode is set to FIX, the SHUTTER menu
will be deactivated.
If the FLICKERLESS function is set to ON, the SHUTTER menu
will be deactivated.
❖
SENS-UP
[OFF, AUTO X2, AUTO X4, AUTO X6, AUTO
X8, AUTO X12, AUTO X16, AUTO X24, AUTO
X32, AUTO X48, AUTO X64, AUTO X96, AUTO
X128, AUTO X256, AUTO X512, FIX X2, FIX
X4, FIX X6, FIX X8, FIX X12, FIX X16, FIX X24,
FIX X32, FIX X48, FIX X64, FIX X96, FIX X128,
FIX X256, FIX X512]
Automatically detects the ambient level of
darkness in the dark or low contrast scene to
extend the accumulated time, keeping the image
bright and sharp; It can be also used as FIX
mode.

Note :
If the SHUTTER option is set to fi xed electronic shutter or
–
EXT mode, the SENS-UP menu will be deactivated.
If FLICKERLESS is set to ON, the FIX mode of the SENS-
–
UP menu will be disabled.
If the IRIS menu is set to ELC, the electronic shutter will
–
OFF
control the brightness so the SENS-UP function can not
be set to FIX mode, but to OFF or AUTO mode.
If the SHUTTER menu is set to AUTO, the SENS-UP
OFF
–
menu can be set to either OFF or AUTO mode.
OFF
If the BACKLIGHT function is set to WDR, the SENS-UP menu
–
can not be set to FIX.
OFF
❖
FLICKERLESS
ON
If set to ON, the shutter speed will be fi xed to
1/100(PAL:1/120) second. This will prevent possible screen
ON
distortion due to a mismatch between the vertical sync
ON
frequency and the blinking frequency of the lighting.

Note :
ON
If the IRIS function is set to ELC, the Flickerless menu will
–
be deactivated. If the SHUTTER menu is set to AUTO, FIX
or EXT mode, the Flickerless menu will be deactivated.
If the SENS-UP function is set to FIX mode, the Flickerless
–
menu will be deactivated.
If AGC is set to FIX mode, the FLICKERLESS function will
–
be disabled.
[OFF, ON]
English 19
–