Denon DN-500AV Owner's Manual page 12

Examples of screen display
• Menu screen • Status display screen
When the input source is
switched.
Menu
Audio Adjust Surr.Parameter
Information Tone
Setup Wizard Manual EQ
System Setup RESTORER
Input Setup Audio Delay
Status display: The operating status appears briefly on the screen
NOTE
• If you operate the menu while playing back 3D video content or computer's resolution (e.g. VGA), the
playback video is replaced by the menu screen. The playback video is not displayed behind the menu
screen.
• This unit does not show the status display while playing back 3D video content or computer's resolution
(e.g. VGA).
• The menu screen and status display are displayed when this unit and a TV are connected by HDMI.
Furthermore, the menu screen and status display are not displayed when this unit and a TV are connected
by VIDEO and COMPONENT VIDEO.
BD
Important information
When the volume is adjusted.
[Auto]
Master Volume
SOURCE :BD
MODE :STEREO
when the input source is switched or the volume is
changed.
Connecting a power amplifier
• First connect a power amplifier in order to output audio from this unit.
• Switch the output voltage with the output level selector according to the connected power amplifier.
• For how to connect this unit with power amplifier, see "Connecting a power amplifier" (C page 6) and
"Speaker installation/connection (Advanced connection)" (vpage 38).
Cables used for connections
Audio cable (sold separately)
XLR cable
This unit
-55.5dB
RCA RCA RCA
XLR XLR XLR
SPEAKERS SPEAKERS SPEAKERS
Power amplifier
6
RCA RCA RCA RCA RCA RCA RCA
XLR XLR XLR XLR XLR XLR XLR
SPEAKERS SPEAKERS SPEAKERS SPEAKERS SPEAKERS SPEAKERS SPEAKERS
Output level
selector