NETGEAR RM356 - Router - EN Reference Manual page 95

You must configure the parameters to activate syslog
Table 9-4. System Maintenance - Syslog and Accounting Menu Fields
Field Command
Active Press the space bar to toggle between
yes and no.
Syslog IP Address Enter the address in dotted-decimal
notation such as a.b.c.d where a, b, c,
and d are numbers between 0 and 255.
Log Facility Press the space bar to toggle between
on and off.
The router sends three different types of syslog messages:
• Call information messages (CDR)
• Error information messages
• Session information messages
Examples of these messages are as follows:
• Call Information Messages:
line 1 channel 1, call 41, C01, Incoming Call, 40001
line 1 channel 1, call 41, C01, Incoming Call, Call Terminated
• Error Information Messages:
line 1, channel 1, call 44, E01, CLID call refuse
line 1, channel 1, call 45, E02, IP address mismatch
• Session Information Messages:
line 1, channel 1, call 41, I01, IPCP up, 306L
line 1, channel 1, call 41, I01, IPCP down, 306L
System Maintenance
Reference Guide for the Model RM356 Modem Router
(Table 9-4).
Description
The syslog option is turned on or off.
This field is the IP address location to
send your syslog.
Seven different local options can be
selected. This feature is used for UNIX
applications.
9-5