NETGEAR RM356 - Router - EN Reference Manual page 117

R
RAS S/W Version, System Maintenance Status
menu 9-2
rear panel 2-7
Redirect to Modem field, System Maintenance
Diagnostic menu 9-6
Rem CLID field, Edit Dial-in User 6-4
Rem IP Addr field
Remote Node Network Layer Options 7-3
Remote Node Profile menu 5-3
Rem Node Name field, Remote Node Profile
menu 5-2
Rem Subnet Mask field, Remote Node Network
Layer Options 7-3
remote dial-in users 6-1
remote node
configuring 5-1
,
setup 5-1 7-2
troubleshooting 10-4
Remote Node Network Layer Options menu 7-3
Remote Node PPP Options menu 5-4
Remote Node Profile menu 5-2
Remote Note Set Up menu 5-1
remote user, troubleshooting 10-4
Reset Modem field, System Maintenance
Diagnostic menu 9-6
,
RIP 1-3 1-5
RIP Direction field
Ethernet Setup menu 3-11
Remote Node Network Layer Options 7-4
RIP Version field
Ethernet Setup menu 3-11
Remote Node Network Options 7-4
Romdhcp 10-6
Romfile0 10-6
Route Name field, Edit IP Static Route menu 7-5
Index
,
7-2
,
7-2
router concepts 1-5
router, connecting 2-5
Routing Information Protocol. See RIP
RX Pkts field, System Maintenance Status
menu 9-2
S
Script Options display 5-5
script options, editing 5-5
Secondary DNS Server field, Ethernet Setup
menu 3-10
,
security 1-2 1-4
serial cable 2-7
serial port, connecting to 2-9
Session Options field
Default Dial-in Setup 6-3
Remote Node Profile menu 5-3
Single User Account field, Remote Node
Network Layer Options menu 7-3
single user account, configuring for 4-3
software, updating 9-9
Source field, TCP/IP Filter Rule menu 8-5
Speed field, System Maintenance Status menu
9-2
static route setup 7-4
Static Route Setup menu 7-4
subnet addressing 1-9
Syslog and Accounting menu 9-4
Syslog IP Address field, Syslog and Accounting
menu 9-5
System field, System Maintenance - Diagnostic
menu 9-7
System Maintenance Status menu 9-2
System Status Menu 9-1
system tools 9-8
5