NETGEAR RM356 - Router - EN Reference Manual page 79

When you press [Enter], Menu 21.1 - Filter Rules Summary is displayed. The information in this
menu is read-only; the parameters of each rule that you configured for that set are displayed.
Table 8-1 lists and describes the abbreviations used in Menu 21.1 - Filter Rules Summary.
Table 8-1. Abbreviations Used in Menu 21.1 - Filter Rules Summary
Abbreviation Description
# Refers to the filter rule number (1–6).
A Refers to Active. Y means the filter rule is active, and N means the filter rule is
inactive.
Type Refers to the type of filter rule and can display GEN for generic or IP for TCP/IP.
Filter Rules The filter rule parameters are displayed here.
M Refers to More. Y means there are more rules to check. N means there are no rules to
check.
m Refers to Action Matched. F means to forward the packet, D means to drop the
packet, and N means to check the next rule.
n Refers to Action Not Matched. F means to forward the packet, D means to drop the
packet, and N means to check the next rule.
For more information about filter rules, refer to
If the filter type is IP (TCP/IP), the abbreviations listed in
Table 8-2. Abbreviations Used if Filter Type Is IP
Abbreviation Description
Pr Protocol
SA Source address
SP Source port number
DA Destination address
DP Destination port number
Filter Configuration
Reference Guide for the Model RM356 Modem Router
"Configuring a Filter
Table 8-2
Rule," on page 8-4.
are used.
8-3