Handling On-Screen Menus; Using The On-Screen Help - Samsung DTB-H260F Owner's Instructions Manual

2
CHAPTER TWO
Remote Control and On-Screen Menus

Handling On-Screen Menus

To go to the On-Screen Menu, press the MENU (
ARROW (///) buttons in the center of your remote control, you
can move between menus.
To enter a specific menu, press the ENTER (
menu or confirm a selected option using this button.
To go back to the previous menu from a sub-menu, press the MENU (
button or select Return on the current menu screen.
To exit from the On-Screen Menu, press the EXIT (
Main-menu
<Example of"Guide"menu>
Sub-menu
<Example of"Full Guide"sub-menu>
NOTE
The On-Screen Menu is displayed only when the COMPONENT jacks or HDMI jack on the rear of your
Set-Top Box are properly connected.
20
) button. Using the
) button.You can select a
)
) button.
2
CHAPTER TWO
Remote Control and On-Screen Menus

Using the On-screen Help

If you want to see the description of each selected menu, use the On-screen Help feature.
To turn the on-screen help on:
1
Press the MENU (
2
Use the / buttons to select the
Preference menu and press the
ENTER ( ) button.
Use the / buttons to select Help
and press the ENTER (
3
Use the / buttons to select"On."
Press the ENTER (
When you move the cursor using the / buttons, you can see the
description of each menu at the top of the On-Screen Menu.
To turn the on-screen help off:
Use the / buttons to select"Off"and press the ENTER (
The on-screen help disappears.
) button on your remote control.
) button.
) button and the on-screen help feature applies.
) button.
21