Related Manuals for Samsung DSB-4700F
Summary of Contents for Samsung DSB-4700F
- Page 1 DSB-4700F Instructions for use MF68-00325A REV. 1.0 DIGITAL SATELLITE RECEIVER DIGITAL SATELLITE RECEIVER...
-
Page 2: Warning! Important Safety Instructions
Warning! Important Safety Instructions... - Page 3 Thank You for Choosing Samsung Thank you for choosing Samsung! Your new Samsung Digital satellite receiver represents the latest in IRD technology. We designed it with easy-to-use on-screen menus and closed captioning capabilities, making it one of the best products in its class. We are proud to offer you a product that will provide convenient, dependable service and enjoyment for years to come.
- Page 4 Outdoor Antenna Grounding Be sure the antenna is properly grounded to provide some protection against voltage surges and built-up static charges. Example of Antenna Grounding as per National Electrical Code Note to CATV System Installer This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
-
Page 5: Table Of Contents
CONTENT Warning! Important Safety Instructions ..... 1 General Features ........7 Connecting Your “STB”... -
Page 6: Connecting Your "Stb
CONNECTING YOUR “STB” 1. LOCATION OF THE RECEIVER Your “STB” should be placed under proper ventilation. Don’t put in completely enclosed cabinet that will restrict the flow of air, resulting in overheating. The location should be safeguarded from direct sunlight, excess moisture, rough handling or household pets. -
Page 7: Description
DESCRIPTION Front Panel This key is for turning the receiver on and Standby. This key is for entering and confirming any data to the receiver in the menu system. This key is for selecting the item. Press while viewing TV and a list of channels is displayed. …... -
Page 8: Remote Control Unit
DESCRIPTION Remote Control Unit 1. POWER This is for switching the receiver ON/STANDBY mode. 2. 0-9 NUMERICAL keys These keys are to enter numeric values and to select the channel directly by entering its number. 3. PG+/PG- These keys are for moving up or down pages on the menu and TV/Radio list. -
Page 9: Basic Functions
BASIC FUNCTIONS 1. Display Screen Before you can view the television program, you must perform the installation. Therefore you will see only menu images at first. After the television channels have been programmed, you will see the following picture(banner) each time you switch channels: Channel Number Signal Status Program Information... - Page 10 BASIC FUNCTIONS 6.1 Service Favorites Press the GREEN(TEXT) key on the control unit to select the Favorites list. Press the GREEN(TEXT) key to switch between favorite list and channel list. Use the / , PG+/PG- keys to select a favorite group or a channel that you want.
-
Page 11: Operating The Receiver
BASIC FUNCTIONS 9. Audio Mode You can choose a mode among left, right or stereo using the BLUE(AUDIO) key. To change the audio mode: Press the BLUE(AUDIO) key to select the left, right or stereo. Press the EXIT key to save and escape from this menu. 10. -
Page 12: Lnb Setting
OPERATING THE RECEIVER 1.1 LNB Setting You can select the satellite and LNB setting conditions to execute channel search and you can alter the settings for 22KHz tone. The parameters set in this menu are needed for programming the channels for the “Auto scanning” and “Manual scanning”. -
Page 13: Auto Scanning
OPERATING THE RECEIVER 1.3 Auto Scanning The sub menu “Auto Scanning” will enable download the channels automatically from the preprogrammed satellites. To download channels automatically: You can select All/Off/Only Free option mode with the the keys in each satellite, which can be displayed more by the PG+/PG- keys . -
Page 14: Smatv Scanning
OPERATING THE RECEIVER 1.5 SMATV Scanning In case that several generations use Antenna and LNB in common, search the service the from 950 to 2150MHz. Select Searching Type “Automatic” or “Manual”. Select Scan Mode “All” or “Only Free”. You can input alternative symbol rate from 1st to 4th. N N o o t t e e : 1. -
Page 15: Delete All Channels
OPERATING THE RECEIVER 2.4 Delete All Channels At the request window, press OK key to delete all channels and press EXIT to exit. 2.5 Delete Scrambled Channels At the request window, press OK key to delete scrambled channels and press EXIT to exit. 2.6 Favorite Channels You can immediately register the present channel to the desired Favorite Group. -
Page 16: Parental Lock
OPERATING THE RECEIVER 3. Parental Lock This “Parental Lock” feature sets viewing restrictions and prevents unauthorized access to your STB through the PIN (Personal Identification Number), which is a 4 digit number. (The factory preset PIN Code : 0000) On selecting this menu, you will have two options: to set lock for any desired channel and to change your PIN value. -
Page 17: Osd Setting
OPERATING THE RECEIVER 4.2 OSD Setting You can set the OSD transparency, the display time, Color Scheme and OSD Position. Select OSD Transparency level. The OSD Transparency level from 0 to 100%. Setting is made with the numeric keys, keys or PG+/PG- keys. -
Page 18: Time & Timer Setting
OPERATING THE RECEIVER 4.4 Time & Timer Setting 1) Time Place the cursor on this sub menu and press OK. Press keys to change local time in Time Zone. The local time will be changed according to your location. GMT is referred to the standard time of Greenwich by broadcasting signal. -
Page 19: Copy Channel Data
OPERATING THE RECEIVER 4.7 Copy Channel Data If you want to copy the channel data from one receiver to another, please follow the instruction below. Please make your own channel data, such as favorite & lock channel with your own master box. Then take your master box when you install another box. -
Page 20: Technical Specifications
TECHNICAL SPECIFICATIONS Power supply Type : SMPS Input voltage : AC 120V~,60 Hz Fuse rating : 250 V/T1.6AH Tuner Freq. Range : 950 ~ 2150 MHz Input signal level : -65 ~ -25 dBm Channel selection : PLL frequency synthesizer Input impedance : 75 Ω... - Page 21 MEMO MEMO...
- Page 22 MEMO...