Part List - Binks HGB-509-5-R38 Operator's Manual

Note : To come back at the initial set up after cleaning operation, purge the air line so to have no
air pressure on intermediary chamber. This intermediary chamber can be used as a safe area if the
membrane brakes and fluid leakage goes through the air line.
To know and differentiate what is your regulator model, an arrow is marked above the cover
which is either in direction of the flushing air inlet connector for the R1 model or in direction of
the 1/ 4 or 1/ 2 printed on the intermediary plate. Take care during the re assembling operation
after maintenance to fit the cover in the right place corresponding to the model of regulator used.
  PART LIST
For the arrangement of the parts, refer the exploded view at the end of the manual.
Rep. Order number Description
1 HGB-404-1
2 HGB-28
3A S-1309-H
3B S-1330-H
4 HGB-408-H
5 HGB-7
6 HGB-403-H
HGB-13-H
7 HGB-42
HGB-43
8A S-24383
8B SSP-6462
9 HGB-54
10 HGB-55-K
11R1 HGB-67
11R2 HGB-56
11R4 HGB-63
12 HGB-68
12b HGB-64
13 HGB-57-1
14m HGB-422
14R HGB-424
15
HGB-426-CO
16
HGB-426
HGB-426-R38
17 S-28216
18 HGB-62
HGB-61
19 HGB-81
HGB-82
20 HGB-49
21 HC-1000
HGB-60
22 HGB-59
HGB-80
SB-6-HGB-H
Adjusting key
Cover
For HGB-509-5-R38 or 609-x-R38, Screw M5 * 16
For HGB-510-R1, R2 & R4, or (CO), Screw M5 * 25
Adjusting screw assembly
Adjusting nut
Stem kit
Spring for diaphragm for HGB-509-5-R38 or HGB-609-5-R38.
Spring for diaphragm for HGB-609-1.2-R38.
Spring for diaphragm for HGB-609-9-R38.
Connector M5 for Rilsan tube. 2.7 *4 mm
Elbow connector M5 for rilsan tube 2.7*4 mm
Cover for HGB-510
Air diaphragm HGB-510
Disc for HGB-510-R1 or R1CO
Disc for HGB-510-R2 or R2CO
Disc for HGB-510-R4 or R4CO
Intermediary washer for R2 & R4
Intermediary washer for R4
Intermediary body
Fluid diaphragm assy. for HGB-509, 609.
Fluid diaphragm assy. for HGB-510-R1/R2/R4 or 1CO, 2CO, 4CO
Regulator body
Kit of Fluid inlet & ball valve with spring (3/8' ' BSP/NPS Male).
Kit of Fluid inlet & ball valve with spring (1/4' ' BSP Female).
Kit of Fluid inlet & ball valve with spring (3/8' ' BSP/NPS Female).
Gasket " D" shape
PTFE gasket
Fluid outlet connector for HGB-510-Rx, 1/4' ' Female
Fluid outlet connector for HGB-509-5-R38, 3/8' ' universal Male
Fluid outlet connector for HGB-609-xx-R38, 1/4' ' BSP Male
Fluid outlet insert connector for HGB-510-Rx-CO
Fluid outlet swivel connector for HGB-510-Rx-CO
Fluid inlet connector Female 1/4' ' BSP for HGB-510-Rx
Fluid inlet connector Male 3/8' ' universal for HGB-510-Rx-CO
Fluid inlet connector Female 3/8' ' BSP for HGB-509/609-R38
13/40
Qty
1
1
6
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1 / 2
1
1
1
1