Data Storage Setup; Training Zones Setup - SRM PowerControl VI Getting Started

PowerControl VI: Getting Started
To download your training and setup the PowerControl VI on your Computer, please download the new SRM
Windows Software version (see www.srm.de/usa/software.html).
Start the software and plug in the PowerControl VI with the USB adapter cable.
Once the PC VI is attached to USB, the PC VI box will go from black to grey indicating the software
recognized the PC VI and the USB cable.
To download your training press the download button
The fourth screen shows the setup menu for data storage.
The storage interval can be set between 0.5 and 5.0 sec.
By increasing or decreasing the storage interval, you will also increase or
decrease the amount of memory available.
For example, a storage interval of 1 second the memory will hold about 1054
hours, while a storage interval of 2 seconds will hold about 2108 hours.
The fifth screen offers the possibility to choose the settings for training zones
defined with heart rate (bpm) or power (watts).
These can also be set through the SRM Windows Software.
Threshold values from exercise tests (lab or field tests) can be used to define
these values and increase quality of your individual training.
The sixth to tenth screen shows the setup for training zone 1 to 5.
Press to increase or
Press to select the next step.
Hold for about 3 seconds to leave the setup menu and go back to the
main menu.
Schoberer Rad Messtechnik GmbH
Rudolf Schulten Str. 6
D-52428 Jülich
Tel.: +49 (2461) 69123-0
Fax:+49 (2461) 69123-17
www.srm.de
29 May 2008
to decrease the value shown.
SRM Service Center Inc.
720 West Monument Street
Colorado Springs, CO 80904
USA
Tel.: +1 (719) 266 4127
Fax: +1 (710) 266 4284
6