Set Markers During Training Rides / Interval Training - SRM PowerControl VI Getting Started

PowerControl VI: Getting Started

Set Markers during Training Rides / Interval Training

The Set Marker option is available to show data during intervals, to set file markers during a
training session, and for lap times.
After downloading the data to your PC with SRM Windows Software, you can see and edit
the sections where you have set markers, and review the data in detail.
An Interval or Marker as it appears after downloading it into your SRM Windows Software
Press to start the interval.
Time on the display will start with zero.
A blinking stopwatch icon
The number of the interval is shown on the left below the stopwatch icon.
The maximum amount of markers shown on the display is 20, but more
markers can be stored and shown after downloading.
Press to stop the interval.
For 10 seconds, the display will show the average data from last interval.
Press to see the maximum data of the interval.
After 10 seconds, the display will switch back to main menu.
Schoberer Rad Messtechnik GmbH
Rudolf Schulten Str. 6
D-52428 Jülich
Tel.: +49 (2461) 69123-0
Fax:+49 (2461) 69123-17
www.srm.de
29 May 2008
appears.
SRM Service Center Inc.
720 West Monument Street
Colorado Springs, CO 80904
USA
Tel.: +1 (719) 266 4127
Fax: +1 (710) 266 4284
4