Samsung RS26WUNS Owner's Manual And Installation page 27

ADJUSTING THE HEIGHT BETWEEN THE DOORS
Making small level adjustments between doors
If the freezer door is lower than the
refrigerator door.
Adjustment location
Please open the doors and adjust the doors as follows:
1) Release the nut (①) on the lower hinge until the upper end of the bolt (➁).
When you release the nut(①), use enclosed hex wrench (➂) to turn the bolt(➁) a little
counter clockwise. Loosen the nut(①) with your finger.
NOTE
2) Please adjust the height difference between the doors turning the bolt (➁) clockwise(
clockwise ( ).
When you turn clockwise (
NOTE
3) After adjusting the doors, turn the nut (①) clockwise(
bolt again with the wrench (➂) to fix the nut(①).
If you do not fix the nut ( ① )firmly, the bolt ( ➁ ) may be released.
NOTE
If the freezer door is higher than the
refrigerator door.
➂ WRENCH
➁ BOLT
➀ NUT
), the door goes up.
➂ WRENCH
➁ BOLT
➀ NUT
) until the lower end of the bolt, then tighten the
➂ WRENCH
➁ BOLT
➀ NUT
27
Adjustment location
) or counter