Installation Of The Water Dispenser Line; Install The Water Filter - Samsung RS2533 Owner's Manual And Installation

INSTALLATION OF THE WATER DISPENSER LINE

Connect the water line to the refrigerator.
1) Slip the compression nut through and plastic
tube.
2) Tighten the compression nut onto 1/4"
comprression fitting(union).
Do not overtighten the compression
NOTE nut.
3) Slip the compression ferrule and nut on cop-
per (or plastic) tubing as shown.
Tighten the comperssion nut onto the com-
pression fitting(union).
4) Turn water on and check for any leakege.
Water line must be connected to drinkable water only
NOTE

Install the water filter.

1) As shown, the fixed cap separates from the refrigerator by rotating
it counterclockwise.
Remove the water filter from the box and put a month indicator
sticker on the filter as shown.
Keep the cap(A) in a safe place for recapping, when
you will not use the filter.
NOTE
2) If the water filter was installed in March, put on the "SEP" sticker.
3) Remove the protective cap then position and insert the
filter as shown.
4) Slowly turn the water filter clockwise 90º to align
the indication mark on the cover, locking the filter in posi
tion. Do not overtighten.
SEPARATION
OF RED CAP
STICKER
(MONTH INDICATION)
Please check that the indication line aligns with the lock position.
NOTE
27
Compression Nut
Compression fitting
Ferrule
Compression Nut
(A)
COVER FILTER
ALIGN THE INDICATION MARK
WITH LOCK POSITION.