Installation Of The Water Dispenser Line - Samsung RS275ACBPXAA Owner's Manual And Installation

Hide thumbs Also See for RS275ACBPXAA:
Table of Contents

Advertisement

INSTALLATION OF THE WATER DISPENSER LINE

Connecting to water supply line
- Shut off the main water supply line and turn the Ice
maker to the off position.
- Locate the nearest cold drinking water line.
- Follow the instructions in the ice maker installation kit.
Connect the water line to the refrigerator.
1) Slip the compression nut through the provided
plastic tubing.
2) Tighten the compression nut onto the 1/4"
compression fitting.
Do not overtighten the compression nut.
NOTE
Using Copper Tubing
- Slip the compression nut and ferrule on
copper tubing as shown.
Using Plastic Tubing
- Insert the molded end of the plastic tubing
into the compression fitting.
3) Tighten the compression nut onto the com-
pression fitting.
4) Turn water on and check for any leakage.
Water line must be connected to drinkable water only.
NOTE
Cut off 1/4 inch of the provided plastic tubing squarely to prevent leaks when reconnecting.
Check the water supply line
Connect the water pipe with coupler and tap.
- Close the main water tap.
- Connect coupler "A" to the tap.
- Every joint should be protected with sealing tape.
WARRANTY INFORMATION
This water line installation is not covered by the
refrigerator or ice maker manufacturer's warranty.
Follow these instructions carefully to minimise the risk
of expensive water damage.
Note:
If the coupler does not fit on the current tap, go to
the nearest authorised service dealer and purchase
the right couplers fittings.
Refrigerator
Ferrule
(Not Provided)
Copper Tubing
(Not Provided)
Household Water Line
The water line must be connect-
ed to the cold water pipe.
If it is connected to the hot
water pipe, it may cause the puri-
fier to malfunction.
COUPLER "A"
27
1. Cold Water line
2. Pipe Clamp.
3.Copper (or Plastic) line
4.Compression Nut
5.Compression Sleeve
6.Shut Off Valve
7.Packing Nut.
Compression Nut (1/4" )
(Provided)
Compression Fitting
(Provided)
Compression Nut (1/4" )
(Not Provided)
Plastic Tubing
(Not Provided)
CAUTION
TAP

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents