La Marzocco GB/5 Manual page 52

"Technical" Programming
Water Volume Programming
Programming Mode
W at er Vol u me
Pr ogr amm i ng
Display
6 To program the tea water dispense button, repeat procedure 1 then press the
keypad that you wish to program. When the light begins to lash, press
amount of water has been dispensed, press the
press the button to exit programming mode.
7 When inished, continue to the next parameter
NOTE: The programming completed for group 1 keypad will be copied to all subsequent keypads. If other
programming is desired for subsequent keypads, follow procedure 1 and 2 substituting the subsequent group
keypad number for procedure 2.
It is recommended to program each group separately.
51
Description
• This parameter allows the operator to
program the water volume (shot volume)
for the individual buttons on the keypad.
Operating Procedure
button again to stop the low of water. When inished
or press
• The saved program is a number. This
number relates to the number of pulses
the lowmeter delivers to the CPU. Once
the programmed number of pulses is
received by the CPU, the low of water
is stopped.
button on the corresponding
the button. When the desired
to exit programming mode.