Advertisement
Quick Links
15
14
13
12
11
10
8
400 East Auburn Drive, Auburn, Indiana 46706-3499 U.S.A.
Phone: (219) 925-3200 • Fax: (219) 925-4725 • Web: http://www.auburngear.com
Power Wheel
Model 6 Single Reduction
Swing Drives
9
5
4
3
7
6
2
1
®
Service Manual
23
22
20
19
18
17
16
21
Advertisement
Related Manuals for Auburn Gear Power Wheel Model 6
Summary of Contents for Auburn Gear Power Wheel Model 6
- Page 1 ® Power Wheel Service Manual Model 6 Single Reduction Swing Drives 400 East Auburn Drive, Auburn, Indiana 46706-3499 U.S.A. Phone: (219) 925-3200 • Fax: (219) 925-4725 • Web: http://www.auburngear.com...
- Page 2 When ordering parts, the information included on the nameplate or the stamped identification number is necessary to accurately identify the drive and obtain the correct replacement parts. Once this information has been obtained, contact Auburn Gear for the appropriate parts list.
-
Page 3: Specifications
NOTE: When installing a hydraulic motor to the Power Wheel drive it is necessary to place an “O” ring or gasket (not supplied by Auburn Gear) between the motor and the planetary drive. “O” ring sizes: SAE A 2-042, SAE B 2-155, SAE C 2-159. - Page 4 Bearing Cone 613319 Excluder Seal 604414 (Shaft up applications only) * Contact Auburn Gear with part number and order code of drive to obtain the appropriate parts list. Refer to parts list for the specific part numbers and quantities. ®...