Double reduction
wheel drives with integral
parking brake option (4 pages)
Summary of Contents for Auburn Gear Power Wheel Model 6
Page 1
® Power Wheel Service Manual Model 6 Single Reduction Shaft and Spindle Output Drives AUBURN, INDIANA 46706-3499 With Integral Parking Brake Option U.S.A. PHONE: (219) 925-3200 FAX: (219) 925-4725...
Page 2
IDENTIFICATION IMPORTANT: All Power Wheel units and kits are shipped with a nameplate that includes the Auburn Gear part number and order code as shown. In addition to the nameplate, Power Wheel drives are stamped with an identification number ®...
NOTE: When installing a hydraulic motor to the Power Wheel drive it is necessary to place an “O” ring or gasket (not supplied by Auburn Gear) between the motor and the planetary drive. “O” ring sizes: SAE A 2-042, SAE B 2-155, SAE C 2-159.
Page 4
Sun Gear Socket or Torx Head Screw Thrust Washer * Contact Auburn Gear with part number and order code of drive to obtain the appropriate parts list. Refer to parts list for the specific part numbers and quantities. ® Model 6 Power Wheel Service Kits Part No.