Setting Up Your Refrigerator; Getting Ready To Install The Refrigerator - Samsung RB194AB User Manual

Samsung refrigerator user manual
Hide thumbs Also See for RB194AB:
Table of Contents

Advertisement

Setting up your Refrigerator

gEtting READy to instALL tHE REfRigERAtoR

Congratulations on your purchase of this Samsung Refrigerator. We hope you enjoy the state-of-art features
and efficiencies that this new appliance offers.
Selecting the best location for the Refrigerator
• A location with easy access to the water supply.
• A location without direct exposure to sunlight.
• A location with level (or nearly level) flooring.
• A location with enough space for the Refrigerator doors to open easily.
• Allow sufficient space for air circulation of the internal cooling system.
If the Refrigerator does not have enough space, the internal cooling
system may not work properly.
First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways
(both width and height), thresholds, ceilings, stairways, etc.
The following chart details the exact height and depth of Samsung Refrigerator.
Depth (mm)
• Allow clearance to the right, left, back and top when installing. This will help reduce power consumption
and keep your energy bills lower.
• If you install the Refrigerator where is below 10ºC(50ºF), it may not function in optimum level.
When moving your refrigerator
To prevent floor damage be sure the front leveling legs are
CAUTION
in the up position(above the floor).
Refer to 'Leveling the refrigerator' in the manual
(on page 14)
FLOORING
For proper installation, this refrigerator must be placed on a level
surface of hard material that is the same height as the rest of the
flooring. This surface should be strong enough to support a fully
loaded refrigerator, or approximately 106kg(223lbs). To protect
the finish of the flooring, cut a large section of the cardboard
carton and place under the refrigerator where you are working.
When moving the refrigerator, be sure to pull it straight out and
return it to position by pushing it straight in.
10_ Setting Up
Model
Capacity (cu.ft)
Width (mm)
with door
without door
Height (mm)
25mm
50mm
RB1AB
RB1AB
19
817
715
628
1778
Screw d river(-)
Control Lever
25mm
RB1AB
RB1AB
21
765
678

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rb196abRb1abRb214abRb216ab

Table of Contents