Samsung RB194AB User Manual page 12

Setting up your Refrigerator
Removal of the fridge door
Be careful not to drop and scratch the fridge door while removing the fridge door!
WARNING
Hinge Cover
1. After removing the screw, remove
the upper Hinge Cover.
ground wire
4. Remove the screw that holds the
ground wire.
Removal of the freezer door (swing tyPE - RB214,RB194)
1. Separate the Cap on the Middle
Hinge.
1_ Setting Up
2. Disconnect electric wire on the
top of the refrigerator.
5. Separate Hinge from electric
wire and ground wire as shown
above.
Middle Hinge
2. After removing one screw and two bolts, remove the Middle Hinge.
(Unscrew the screws with the screwdriver(+) and hex bolts with the
4.75mm hex wrench.)
3. With the 10mm wrench,
remove the three bolts that
hold the hinge on the top of the
refrigerator.
6. Remove the fridge door by lifting
it upward.
Be careful not to drop and
scratch the fridge door.