Genelec 8030A Instruction Manual page 2

WALL MOUNT for GENELEC 8030A, 8040A, 8050A
instruction manual
4. installation
4.a
Bolt to T-Adaptor for:
-vertical mounting
-(8030A)
-horizontal mounting
-(8040A, 8050A)
5. settings
5.a
Continuously adjustable up to 30°,
by fixing the upper bolted assembly
5.b
Pivoting attachment
around vertical axis
4.a
(alternative)
Remove T-Adaptor for:
-horizontal mounting
-(8030A)
-vertical mounting
-(8040A, 8050A)
-with swivel joint
6. dimensions
Weight: 0.9 / 1.2 kg
max. load 15 kg, easy handling, adjustable direction and angle
4.b
Replace swivel joint (with mounted GENELEC)
into wall bracket
safety instructions
-Max. load capacity: 15 kg
-Use four anchors per wall bracket
-Choose a position and mounting method compliant with local
-building codes and regulations
-For use only by trained installers
-For use only at proper walls with adequate anchors (see 3.)
-Not suitable are fragile walls. Beware of power supply lines and water conduits.
-In case ask an expert.
-Inspect bolted assemblies periodly
-For indoor use only
4.c
Secure swivel joint to the wall bracket
by tightening lower bolted assembly