Genelec 8030A Instruction Manual

WALL MOUNT for GENELEC 8030A, 8040A, 8050A
instruction manual

1. separate swivel joint from wall bracket

1.b
Gather swivel joint from
wall bracket
1.a
Loosen lower
bolted assembly

2. wall bracket fastening

2.a
Adjust wall
plate vertically
concrete wall - e.g.: steel-anchor-bolt M6 x 65 mm
-drill and blow out hole, place anchor, wall bracket and
washer, tighten hexnut
2.b
Anchor holes drilling (4x)
diameter
-6 mm steel-anchor-bolt
-8 mm universal frame fixing set
without sieve bushing for concrete wall - with sieve bushing for perforated bricks / optional with threaded bolt M6 or threaded bushing M6
Advantages: fixing without pressure, enables repeated mounting, capable for diverse wall materials
Advantages:

3. wall mount options

perforated bricks - e.g.: unsiversal frame fixing set 8 x 80 mm
-drill, countersink and blow out hole, place anchor and bracket, fix hexagon
head wood screw
C
injection-molded-anchor
(please notice instructions of anchor manufacturers).
max. load 15 kg, easy handling, adjustable direction and angle
Olvitie 5, Fin-74100 Iisalmi, www.genelec.com
24475-000-55/57 Rev.03 03-80-486-00 7/06
GENELEC Oy