IAG -AFD-3004 Instructions Manual page 4

5. Using a 12mm socket, remove the (2) 12mm bolts
holding the EGR tube to the back of the intake manifold.
6. Unplug the (2) gray OEM TGV harness connectors on
each side of the intake manifold.
7. Using a 12mm socket, ratchet and extension remove the
(8) 12mm bolts that secure TGV's to the intake manifold.
*Passenger side bolt locations shown. Similar on driver side.
IAG Performance | 1203 Baltimore Blvd. Westminster, MD 21157 | Ph: 410-840-3555 | www.iagperformance.com 4