Output To Usb Memory (Touch Screen Controller Only); System Initialize (Touch Screen Controller Only); Alarm Email Address Setting (Touch Screen Controller Only) - Toshiba BMS-CT5121E Owner's Manual

TOUCH SCREEN CONTROLLER for Air Conditioning Control System

[2-10] Output to USB memory (TOUCH SCREEN CONTROLLER only)

This is used to output alarm data and data for power distribution to a USB memory that is connected.
(1) Connect a USB memory to the USB port.
<1>
(2) Tap the [OK] button
<1>
(3) The [OK] button

[2-11] System initialize (TOUCH SCREEN CONTROLLER only)

Restarts and resets the selected machine.
<1>
(1) Select the machine
<2>
(2) Tap the [OK] button

[2-12] Alarm email address setting (TOUCH SCREEN CONTROLLER only)

When abnormalities occur, the name of the air conditioner, the time and date of the abnormalities, and information about the
abnormalities are sent to the email addresses set as recipients.
▼ Setting addresses
(1) Enter your email address in [Address]
<2>
(2) Tap the [OK] button
▼ Test transmission
(1) The [Test transmission] button
* A test email is transmitted to the email address that is set.
to output the alarm files, and monthly and daily reports to the USB memory.
is enabled, when the process is complete, remove the USB memory.
<1> <1>
to reset.
to reset the selected machine.
<1> <1>
<3> <3>
<1>
. (Maximum of 5 addresses)
to apply the settings.
<3>
is enabled when the addresses are set, so tap it.
<1> <1>
<2> <2>
<2> <2>
Owner's Manual
EN
53-