Start Using Workshop4 Ide - 4D systems gen4-uLCD-50 D Quick Start Manual

QUICK START GUIDE

Start Using Workshop4 IDE

1) Open Workshop4 IDE and create a new project.
2) Select the display module you're using from the list.
3) Select your desired orientation for your project.
4) Click next.
5) Choose a WS4 Programming Environment. Only the compatible programming
environment for the display module will be enabled.
Follow steps 6a.1 to 6a.2 if you have the display module connected already
6a.1) Click on the COMMs tab with the display module connected, Comm Port will be
automatically selected for you and it will show you a BLUE Dot with the name of
the display module beside it.
6a.2) Click on the Home tab and start creating your project
Page 5 of 6