Table of Contents
Advertisement
Operation
Memorizing the Channels
Your TV can memorize and store all of the available channels for both air and cable channels.
After the available channels are memorized, use the CH
the channels. This eliminates the need to change channels by entering the channel digits.
There are three steps for memorizing channels: selecting a broadcast source, memorizing the
channels (automatic) and adding and deleting channels (manual).
English - 34
Selecting the Video Signal Source
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e., an antenna or cable system).
1
Press the MENU button.
Press the
... or † button to
select "Channel", then press
the ENTER button.
2
Press the ENTER button to
select "Antenna".
Press the
... or † button to
select "Air" or "Cable", then
press the ENTER button.
3
Press the
... or † button to
select "Auto Program", then
press the ENTER button.
Continued...
NOTE
• All available DTV and analog channels are automatically stored
in memory.
and CH
buttons to scan through
Channel
Input
Antenna
: Cable
Auto Program
Picture
Add/Delete
Sound
Favorite Channels
Name
Channel
Fine Tune
Setup
▼ More
Guide
Move
Channel
Input
Antenna
: Cable
Air
Cable
Auto Program
Picture
Add/Delete
Sound
Favorite Channels
Name
Channel
Fine Tune
Setup
▼ More
Guide
Move
Channel
Input
Antenna
: Cable
Auto Program
Picture
Add/Delete
Sound
Favorite Channels
Name
Channel
Fine Tune
Setup
▼ More
Guide
Move
√
√
√
√
√
√
Enter
Return
Enter
Return
√
√
√
√
√
√
Enter
Return
Advertisement
Table of Contents
