Samsung SP50L7HD Owner's Instructions Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Projection TV
  5. SP50L7HD
  6. Owner's instructions manual

Samsung SP50L7HD Owner's Instructions Manual

Dlp tv
Hide thumbs Also See for SP50L7HD:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Owner's Instructions
SP50L7HD
Register your product at www.samsung.com/global/register

Advertisement

Table of Contents
loading

Related Manuals for Samsung SP50L7HD

Summary of Contents for Samsung SP50L7HD

  • Page 1 Owner’s Instructions SP50L7HD Register your product at www.samsung.com/global/register...
  • Page 3 A Guide to Digital TV • What is Digital Television? Digital television (DTV) is a new way of transmitting high quality video and audio to your TV set. Using DTV, broadcasters can transmit high definition TV (HDTV) images, Dolby digital surround audio, and new services such as multicasting (transmitting more than one program on the same TV channel) and datacasting.
  • Page 4 CableCARD and Digital Cable Ready TVs CableCARD and Digital Cable Ready TVs are the products of a new digital cable standard. This new standard is called OpenCable and it is a concerted effort to standardize the digital cable service network interface in North America. For more information, please refer to www.cablelabs.com.
  • Page 5 Q&A 1. Is the antenna I use for existing TV reception good enough for DTV? Over-the-air (OTA) digital TV broadcasting uses the same channels as analog TV and works well with many existing TV antennas. However, DTV broadcast channel assignments are different than analog channels.

  • Page 6: Table Of Contents

    Table of Contents Your New Wide TV ...10 Viewing Position ...10 Replacing the Lamp ...10 List of Features ...12 Accessories ...12 Front Panel Buttons ...13 Front Panel Information Window...14 Rear Panel Jacks ...15 Remote Control ...16 Connections ...20 Connecting VHF and UHF Antennas...20 Antennas with 75-ohm Round Leads ...20 Connecting Cable TV ...21 Cable without a Cable Box ...21...
  • Page 7 Channel Control ...48 Selecting Your Favorite Channels ...48 Labeling the Channels ...49 Fine Tuning Analog Channels Checking the Digital-Signal Strength LNA (Low Noise Amplifier)...52 Picture Control...54 Picture Control ...54 Selecting the Color Tone ...56 Changing the Picture Size ...57 Digital Noise Reduction ...58 DNIe (Digital Natural Image engine) Setting the My Color Control Mode...60...
  • Page 9 Your New Wide TV...

  • Page 10: Your New Wide Tv

    2. The lamp type is indicated on the left side of the TV. It is also indicated on the lamp case. 3. After checking the code number for the lamp, give the code number to the store where you purchased the TV or to a Samsung Service center. • Caution 1.
  • Page 11 • For replacement, you will need a 5.91-Inch screwdriver and a pair of gloves. Unplug TV, then use a screwdriver to remove the screws. Open the Lamp cover. Remove the 2 press-pin screws securing the Lamp. Separate the Lamp from the engine by holding the handle and pulling it out.

  • Page 12: List Of Features

    • My Color Control Mode for corresponding with your color style • Color weakness Mode • Digital Input (HDMI/DVI IN) jack • Digital Audio Output (OPTICAL) jack • AV network system (Anynet) that enables you to easily control Samsung audio-video(AV) devices from this TV. • CableCARD slot Accessories Once you have unpacked your TV, check to make sure that you have all the parts shown here.

  • Page 13: Front Panel Buttons

    Front Panel Buttons The buttons on the front panel control your TV’s basic features, including the on-screen menu system. To use the more advanced features, you must use the remote control. Standby state. (Standby indicator; Red) Press and hold the POWER button for a few seconds to turn the TV on or off.

  • Page 14: Front Panel Information Window

    Your New Wide TV Front Panel Information Window NOTES • It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately. • The TV has a fan to keep the inside lamp from overheating. You’ll occasionally hear it working. English - 14 The Information window appears as illustrated above while the TV is turning on.

  • Page 15: Rear Panel Jacks

    Connect to a Digital Audio Component. (Refer to page 29) ” Anynet Please refer to the Anynet Owner’s Instruction. This jack is for connecting to other Samsung Anynet-enabled devices. ’ HDMI (High Definition Multimedia Interface)/ DVI INPUT jack Connect to the HDMI jack of a device with HDMI output.

  • Page 16: Remote Control

    You can use the remote control up to about 23 feet from the TV. When using the remote control, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player and some Samsung Set-top boxes. See pages 38~39 for details. 1. POWER Turns the TV on and off.
  • Page 17 Installing Batteries in the Remote Control With normal use, the batteries in the remote control should last about a year. If you notice a performance degradation while using the remote, the batteries may need to be replaced. Make sure you replace both batteries and do not mix old and new batteries in the remote control.
  • Page 19 Connections...

  • Page 20: Connections

    Connections Connecting VHF and UHF Antennas If you do not have a cable system, you will need to connect an antenna to your TV. Antennas with 75-ohm Round Leads If your antenna looks like this: Plug the antenna lead into the ANT 2 IN (AIR) on the rear panel of your TV.

  • Page 21: Connecting Cable Tv

    Connecting Cable TV You can connect different cable systems to your TV, including cable without a Cable box, and cable with a Cable box that descrambles some or all channels. Cable without a Cable Box If you want to connect cable, and you do not need to use a cable box: Plug the incoming cable into the ANT 1 IN (CABLE) on the rear panel of your...

  • Page 22: Cable With A Cable Box That Descrambles Some (But Not All) Channels

    Cable with a Cable Box that Descrambles Some (But Not All) Channels To complete this connection you will need a two-way splitter, an RF (A/B) switch, and four coaxial cables (which you can buy from your Samsung dealer or any electronics store). Find and disconnect the...

  • Page 23: Connecting A Vcr

    Connecting a VCR Connecting a VCR to the Video or S-Video/Audio jack Connect the Video/Audio cables between the VIDEO or S-VIDEO/AUDIO input jacks on the TV and VIDEO or S-VIDEO/AUDIO output jacks on the VCR. Connect a coaxial cable between the Antenna out terminal (i.e., “OUT to TV”) on the VCR and the ANT 1 IN (CABLE) on the TV.

  • Page 24: Connecting Cablecard

    Connections Connecting CableCARD You must obtain a CableCARD from a local cable service provider. Insert the CableCARD into the “CableCARD” slot and the message “CableCARD Inserted” is displayed on the screen. If the channel information does not already exist, the message “Updating Channel List”...

  • Page 25: Connecting A Camcorder

    Connecting a Camcorder You can use your camcorder to view tapes without using a VCR. Locate the A/V output jacks on the camcorder. They are usually found on the side or back of the camcorder. Connect a set of audio cables between the AUDIO IN jacks on the TV and the AUDIO OUT jacks on the...

  • Page 26: Connecting A Dvd Player

    Connections Connecting a DVD Player The rear panel jacks on your TV make it easy to connect a DVD player to your TV. Connecting to Y, P Connect a set of audio cables between the COMPONENT (1 or 2) AUDIO (L, R) IN jacks on the TV and the AUDIO OUT jacks on the DVD player.

  • Page 27: Connecting A Dtv Set-Top Box

    Connecting a DTV Set-Top Box Connecting to Y, P Connect a set of audio cables between the COMPONENT (1 or 2) AUDIO (L, R) IN jacks on the TV and the AUDIO OUT jacks on the Set-Top Box. Connect a set of video cables between the COMPONENT (1 or 2) VIDEO (Y, P...

  • Page 28: Connecting To Hdmi (High Definition Multimedia Interface)

    Connections Connecting to HDMI (High Definition Multimedia Interface) Connect an HDMI cable between the HDMI/DVI IN jack on the TV and the HDMI OUT jack on the Set-Top Box. NOTE • Make sure the HDMI/DVI source's power is on, or you will be unable to select it in the menu's source list.

  • Page 29: Connecting A Digital Audio System

    Connecting a Digital Audio System There are many types of digital audio systems on the market today. A simplified illustration of an audio system is shown below. For more information, see your audio system owner’s manual. If your audio system has a optical digital audio input, connect to the “DIGITAL AUDIO OUT(OPTICAL)”...
  • Page 31 Operation...

  • Page 32: Operation

    Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the front panel. Viewing the Menus and On-Screen Displays The on-screen menu system allows you to control the settings of your TV. Access the on-screen menu system by pressing the MENU button on the remote control.

  • Page 33: Selecting A Menu Language

    Selecting a Menu Language Press the MENU button. Input Press the … or † button to Picture select “Setup”, then press the Sound ENTER button. Channel Setup Guide Press the ENTER button to Input select “Language”. Picture Press the … or † button to Sound select “English”, “Español”...

  • Page 34: Memorizing The Channels

    Operation Memorizing the Channels Your TV can memorize and store all of the available channels for both air and cable channels. After the available channels are memorized, use the CH the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).
  • Page 35 Press the … or † button to select the Antenna connection, then press the ENTER button. • Air : “Air” antenna signal Cable : “Cable” antenna signal Air+Cable : “Air” and “Cable” antenna signals • If the CableCARD is inserted into the “CableCARD”...

  • Page 36: Adding And Erasing Channels

    Operation Adding and Erasing Channels You can add channels that were not memorized (or delete unwanted channels from memory). English - 36 Press the MENU button. Press the … or † button to select “Channel”, then press the ENTER button. Channel Press the …...

  • Page 37: Changing Channels

    Changing Channels Using the Channel Buttons Press the CH or CH button to change channels. When you press the CH or CH You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels.) You will not see channels that were either erased or not memorized.

  • Page 38: Customizing Your Remote Control

    Your TV comes equipped with a universal remote control. In addition to controlling the TV, the universal remote control can also operate a VCR, Cable box, DVD, and some Samsung Set-top boxes (even if your VCR, Cable box and DVD are made by manufacturers other than Samsung).

  • Page 39: Remote Control Codes

    Remote Control Codes VCR Codes Cable Box Codes DVD Codes English - 39...

  • Page 40: Setting The Clock

    Operation Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) NOTE • The current time will appear every time you press the INFO button.
  • Page 41 Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Press the … or † button to select “Time”, then press the ENTER button.

  • Page 42: Setting The On/Off Timer

    Operation Setting the On/Off Timer NOTE • Auto Power Off When you set the timer “On”, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by the timer. This function is only available in timer “On”...

  • Page 43: Setting The Sleep Timer

    Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes). Alternate method Press the SLEEP button on the remote control repeatedly until the appropriate time interval appears (any of the preset values from “30 min”...

  • Page 44: Viewing An External Signal Source

    Operation Viewing an External Signal Source Use the remote control to switch between viewing signals from connected equipment, such as a VCR, DVD, Set-Top Box or the TV source (broadcast or cable). English - 44 Setting the Signal Source Press the MENU button. Press the ENTER button to select “Input”.

  • Page 45: Assigning Names To External Input Mode

    Assigning Names to External Input Mode This feature enables you to name the input source you have connected. Press the MENU button. Input Press the ENTER button to Picture select “Input”. Sound Channel Setup Guide Press the … or † button to Input to select “Edit Name”, then Picture...
  • Page 47 Channel Control...

  • Page 48: Channel Control

    Channel Control Selecting Your Favorite Channels You can store your favorite channels for each available input source (such as TV and CATV). This allows you to quickly and easily find frequently watched channels by pressing the FAV.CH button on the remote control. English - 48 To Store Your Favorite Channels: Press the MENU button.

  • Page 49: Labeling The Channels

    Labeling the Channels Use this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”, “PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or a blank. When the INFO button is pressed, the channel label will appear below to the channel number.

  • Page 50: Fine Tuning Analog Channels

    Channel Control Fine Tuning Analog Channels Use fine tuning to manually adjust a particular channel for optimal reception. NOTES • Only analog TV channels can be fine tuned. • The symbol “ * ” will appear next to the name of the channels you have adjusted.

  • Page 51: Checking The Digital-Signal Strength Digital

    Checking the Digital-Signal Strength Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels.

  • Page 52: Lna (Low Noise Amplifier)

    Channel Control LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). English - 52 Press the MENU button. Press the … or † button to select “Channel”, then press the ENTER button.
  • Page 53 Picture Control...

  • Page 54: Picture Control

    Picture Control Picture Control You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”, and “Tint” according to personal preference. (Alternatively, you can use one of the automatic settings. See next page.) NOTE • “Tint” doesn’t operate in HDMI/DVI or 480p Component or higher modes.
  • Page 55 Using Automatic Picture Settings Your TV has automatic picture settings (“Dynamic”, “Standard” and “Cinema”) that are preset at the factory. You can select “Standard” which automatically recalls your personalized picture settings. Press the MENU button. Press the … or † button to select “Picture”, then press the ENTER button.

  • Page 56: Selecting The Color Tone

    Picture Control Selecting the Color Tone English - 56 Press the MENU button. Press the … or † button to select “Picture”, then press the ENTER button. Press the … or † button to select “Color Tone”, then press the ENTER button. Press the …...

  • Page 57: Changing The Picture Size

    Changing the Picture Size You can select the picture size which best corresponds to your viewing requirements. Alternate method Press the ASPECT button on the remote control repeatedly to select one of the picture size settings. • Supported screen resolution modes may differ depending on the model of the product.

  • Page 58: Digital Noise Reduction

    Picture Control Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. English - 58 Press the MENU button. Press the …...

  • Page 59: Dnie

    DNIe (Digital Natural Image engine) This feature brings you a more detailed image with 3D noise reduction and detail, contrast and white enhancement. Alternate method Press the DNIe button on the remote control repeatedly to select one of the settings. •...

  • Page 60: Setting The My Color Control Mode

    Picture Control Setting the My Color Control Mode My Color Control allows users to adjust colors according to their preferences, by adjusting skin, sky, and grass tones using the predefined settings (“Blue”, “Green”, “Pink”, “Standard”, and “Custom”) without affecting other colors on the screen. NOTES •...
  • Page 61 Customizing the setting of My Color Control The users are able to, adjust 3 types of colors on My Color Control (“Pink”, “Green” and “Blue”). Resetting the My Color Control Colors to the Factory Defaults You can return to the factory default settings for My Color Control colors.

  • Page 62: Using The Color Weakness Enhancement Feature

    Picture Control Using the Color Weakness Enhancement Feature This feature adjusts the Red, Blue or Green color to enhance the picture according to the user’s particular color weakness. English - 62 Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button.

  • Page 63: Setting The Film Mode

    Setting the Film Mode You can automatically sense and process film signals from all sources and adjust the picture for optimum quality. NOTE • Film mode is supported in 480i only. Press the MENU button. Input Press the … or † button to Picture select “Picture”, then press Sound...

  • Page 64: Viewing Picture-In-Picture

    Picture Control Viewing Picture-In-Picture One of the most best features of your TV is the Picture-In-Picture (PIP) feature. The advanced PIP system allows you to watch two different pictures at once, even if you don’t have a VCR or DVD connected to your TV.
  • Page 65 Selecting an External Source You can use PIP to view a signal from an external source, such as a VCR. NOTE • For more information about external signals, see “Viewing an External Signal Source” (See page 44). If you select “TV”, the sub picture will be the same as the main picture. Press the MENU button.
  • Page 66 Picture Control Swapping the Sub Picture and Main Picture English - 66 Press the MENU button. Press the … or † button to select “Picture”, then press the ENTER button. Press the … or † button to select “PIP”, then press the ENTER button.
  • Page 67 Changing the Size of the Sub Picture Press the MENU button. Press the select “Picture”, then press the ENTER button. Press the select “PIP”, then press the ENTER button. Press the select “Size”, then press the ENTER button. Press the … or † button to select a size you want, then press the ENTER button.
  • Page 68 Picture Control Changing the Location of the Sub Picture English - 68 Press the MENU button. … or † button to Press the select “Picture”, then press the ENTER button. Press the … or † button to select “PIP”, then press the ENTER button.
  • Page 69 Changing the Channel of the Sub Picture After you set the signal source (air or cable) of the sub picture, it is easy to change channels. Press the MENU button. Press the select “Picture”, then press the ENTER button. Press the select “PIP”, then press the ENTER button.

  • Page 70: Selecting The Sound Source

    Picture Control Selecting the Sound Source You can use this feature to hear sound from the main or sub (PIP) picture. English - 70 Press the MENU button. Press the … or † button to select “Sound”, then press the ENTER button. Press the …...

  • Page 71: Freezing The Picture

    Freezing the Picture Press the STILL button to freeze a moving picture. (Normal sound will still be heard.) Press again to cancel. NOTE • In the PIP mode, the main and sub pictures are stilled at the same time. English - 71...

  • Page 72: Setting The Blue Screen Mode

    Picture Control Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue Screen”...
  • Page 73 Sound Control...

  • Page 74: Sound Control

    Sound Control Sound Control You can control and customize the sound levels and settings of the TV with the remote control. English - 74 Adjusting the Volume Press the VOL+ or VOL– buttons to increase or decrease the volume. Using the MUTE Button At any time, you can temporarily cut off the sound.
  • Page 75 Press the œ or √ button to select a particular item to be changed. Press the … or † button to increase or decrease the selected frequency. Press the EXIT button to exit. NOTES • If you make any changes to the equalizer settings, the sound mode is automatically switched to the custom mode.

  • Page 76: Setting The Srs Tsxt

    Sound Control Setting the SRS TSXT TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. Trusurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

  • Page 77: Auto Volume

    Auto Volume Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the volume every time the channel is changed. “Auto Volume” automatically adjusts the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

  • Page 78: Choosing A Multi-Channel Sound (Mts) Track

    Sound Control Choosing a Multi-Channel Sound (MTS) track The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages). The availability of these additional “multitracks” depends upon the program. English - 78 Digital Press the MENU button.

  • Page 79: Choosing A Multi-Channel Sound (Mts) Track

    Choosing a Multi-Channel Sound (MTS) track Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP. Alternate method Press the MTS button on the remote control repeatedly to select an external signal source. NOTES • Choose “Mono” for channels that are broadcasting in mono, or if you are having difficulty receiving a stereo signal.

  • Page 80: Choosing A Digital Sound Format Digital

    Sound Control Choosing a Digital Sound Format Digital sound can be output from the rear-panel connector on your TV. The digital sound output is an optical connector labeled “Optical Out”. After connecting an optical digital-audio component, you must specify the transmission format (Dolby or PCM, as appropriate to your digital audio component).

  • Page 81: Selecting The Internal Mute

    Selecting the Internal Mute When using a device such as a Home Theater or Amplifier with external speakers, you can set Internal Mute to On to cut off sound from the TV's internal speakers. NOTES • The VOL +, VOL - and Mute buttons do not operate when the Internal Mute is set to On.

  • Page 82: Setting The On/Off Melody

    Sound Control Setting the On/Off Melody A melody sound can be set to come on when the TV is powered On or Off. English - 82 Press the MENU button. Press the … or † button to select “Sound”, then press the ENTER button.
  • Page 83 Special Features...

  • Page 84: Special Features

    Special Features Setting the Function Help Displays Help on the menu functions. English - 84 Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button. Press the … or † button to select “Function Help”, then press the ENTER button.

  • Page 85: Menu Transparency Level

    Menu Transparency Level Adjusts the transparency of the menu screen. Press the MENU button. Press the … or † button to Input select “Setup”, then press Picture the ENTER button. Sound Channel Setup Guide Press the … or † button to select “Menu Transparency”, Input then press the ENTER button.

  • Page 86: Using The V-Chip

    Special Features Using the V-Chip Access to channels and programs is controlled by a password (i.e., a 4-digit secret code that is defined by the user). The on-screen menu will instruct you to assign a password (you can change it later, if necessary). English - 86 How to Change Your Password Press the MENU button.
  • Page 87 How to Enable/Disable the Rating Controls Press the MENU button. Input Press the … or † button to Picture select “Setup”, then press Sound the ENTER button. Press the … or † button to Channel select “V-Chip”, then press Setup the ENTER button.
  • Page 88 Special Features How to Set up Restrictions Using the “TV Parental Guidelines” The parental restrictions can be set up using either of two methods: The “TV Parental Guidelines” or “MPAA Rating”. English - 88 Press the MENU button. Press the …...
  • Page 89 You can independently lock the TV ratings. The locked TV (FCC) ratings are indicated by the symbol “ ”. Press the …/†/œ/√ buttons and the ENTER button to activate the appropriate restrictions for TV (FCC) rating system. TV-Y : Young children TV-Y7 : Children 7 and over TV-G : General audience...
  • Page 90 Special Features How to Set up Restrictions Using the “MPAA Rating” The Movie rating system uses the “MPAA” (Motion Picture Association of America) system, and its main application is for movies. When the rating control is on, the TV will automatically block any programs that are coded with objectionable ratings (either “MPAA Rating”...
  • Page 91 Important Notes About Parental Locks Explanation of the MPAA and TV (FCC) Rating Systems: TV (FCC) Age-Based Ratings TV-MA Mature audiences only. This program may contain mature themes, profane language, graphic violence and explicit sexual content. TV-14 Parents strongly cautioned. This program may contain sophisticated themes, sexual content, strong language and more intense violence.

  • Page 92: Viewing Closed Captions (On-Screen Text Messages)

    Special Features Viewing Closed Captions (On-Screen Text Messages) The Analog Caption function operates in either analog RF channel mode or external signal mode. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.) English - 92 Analog Press the MENU button.
  • Page 93 Press the … or † button to select “Mode”, then press the ENTER button. Press the … or † button to select submenu (CC1~CC4 or Text1~Text4) you want, then press the ENTER button. Press the EXIT button to exit. NOTES •...

  • Page 94: Viewing Closed Captions (On-Screen Text Messages)

    Special Features Viewing Closed Captions (On-Screen Text Messages) The Digital Captions function operates on digital channels. NOTE • “Caption Options” are available only when “Service1~ Service6” can be selected in “Mode”. English - 94 Press the MENU button. Press the …...
  • Page 95 Press the … or † button to select “Size”, then press the ENTER button. Press the … or † button to select one you want, then press the ENTER button. Set other listed options below using the same method as above. Press the EXIT button to exit.

  • Page 96: Using The Cablecard

    Special Features Using the CableCARD This menu works with a CableCARD provided by a local cable service provider. Prior to accessing this menu, a CableCARD should be connected to the rear panel of the TV. For detailed connection instructions refer to the “Connecting CableCARD” section on page 24 of this manual.

  • Page 97: Using The Cablecard Setup Function

    Using the CableCARD Setup Function Sets up relevant CableCARD options. CableCARD Reset Resets CableCARD when the channels provided by CableCARD are not available. Press the MENU button. Press the … or † button to Input select “Setup”, then press Picture the ENTER button.
  • Page 98 Special Features Channel List Reorganization Deletes and reorganizes the channel list provided by CableCARD. This feature should be used if you change or upgrade your CableCARD service. English - 98 Press the MENU button. Press the … or † button to select “Setup”, then press the ENTER button.

  • Page 99: Using The Guide

    Using the Guide You can display a list of all channels or your favorite channels. Alternate method Press the CH.LIST button on the remote control to display a list of channels. Press the MENU button. Input Press the … or † button to Picture select “Guide”, then press Sound...
  • Page 100 Special Features Adding and Erasing Channels English - 100 Press the MENU button. Press the … or † button to select “Guide”, then press the ENTER button. … or † button to Press the select “Edit Channel List”, then press the ENTER button. Press the …...
  • Page 101 Appendix English - 101...

  • Page 102: Appendix

    Appendix Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest Samsung authorized service center. Problem Poor picture quality. Poor sound quality.

  • Page 103: Cleaning And Maintaining Your Tv

    TV channel frequencies. Specifications Model Voltage Frequency of Operation Dimensions (W x D x H) Weight SP50L7HD AC 127V~ 60Hz 53.58 x 20.47 x 54.64 inches 1361 x 520 x 1388 mm 57.9 Kg / 127.65 lbs English - 103...
  • Page 104 Printed in Mexico BP68-00561A-00...

Table of Contents