Introduction To Assembly - Batch Bicycles Cruiser Owner's Manual

Table of Contents

Advertisement

Introduction to Assembly

This Owner's Manual is made for several diff erent bicycles:
• Some illustrations may vary slightly from the actual product.
• Follow instructions completely.
• If the bicycle has any parts that are not described in this manual, look for separate "Special
Instructions" that are supplied with the bicycle.
• Models may have diff erent accessory items such as bags, baskets, refl ectors, cup holders,
racks, etc.
• All features, components and accessories are not included on all models.
• Use the Index page to locate specifi c sections of this manual.
• Please read through this entire manual before beginning assembly or maintenance.
• If you are not confi dent with assembling this unit, refer to a local bike shop.
WARNING
: Keep small parts away from children during assembly.
NOTE: All of the directions (right, left, front, rear, etc.) in this manual are as seen by the rider
while seated on the bicycle.
Do not dispose of the carton and packaging until you complete the assembly of the bicycle.
This can prevent accidentally discarding parts of the bicycle.
Tools Needed (not included)
Adjustable Wrench
Metric Allen Wrenches
8
Open-end Wrenches
Lubrication
WARNING:
• Do not over lubricate. If oil gets on the wheel rims or the brake shoes, it will reduce
brake performance and a longer distance to stop the bicycle will be necessary. Injury to
the rider or to others can occur.
• The chain can throw excess oil onto the wheel rim. Wipe excess oil off the chain.
• Keep all oil off the surfaces of the pedals where your feet rest.
• Using soap and hot water, wash all oil off the wheel rims, the brake shoes, the pedals,
and the tires.
• Rinse with clean water and dry completely before you ride.
• Using a light machine oil (20W), lubricate the bicycle according to the following table:
Lubrication Table (as equipped)
What
When
Pedals
every six months
Chain
every six months
How
Put four drops of oil where the axles go into the
pedals.
Put one drop of oil on each roller of the chain.
Wipe all excess oil off the chain.
17

Advertisement

Table of Contents
loading

Table of Contents