Parts View; Chain Adjustment - Batch Bicycles Cruiser Owner's Manual

Parts View

6

Chain Adjustment

WARNING:
• The chain must remain on the sprock-
ets. If the chain comes off the sprock-
ets, the coaster brake will not operate.
• Do not attempt chain repairs. If there
is a problem with the chain, have a
bicycle service shop make any repairs.
Adjustment:
The chain must be at the correct tightness. If too tight, the bicycle will be diffi cult to pedal.
If too loose, the chain can come off the sprockets.
C
When the chain is at the correct tightness, you can rotate the crank freely and you can
A
pull it no more than one-half inch away from a straightedge
Adjust the tightness of the chain as follows:
• Loosen the axle nuts of the rear wheel.
• Move the rear wheel forward or backward as necessary.
NOTE: Make sure the rear wheel is in the center of the bicycle frame.
• Hold the wheel in this position and tighten securely.
C
B
A
B
as shown.
19