Installation - LG GL-442 Owner's Manual

INSTALLATION /

1. Select a good location.
Place your refrigerator where it is easy to use.
2. Avoid placing the unit near heat sources,
direct sunlight or moisture.
3. To ensure proper air circulation around the
fridge -freezer, please maintain sufficient
space on both the sides as well as top and
maintain at least 2 inches (5 cm) from the
rear wall.
4. To avoid vibrations, the unit must be level. If
required, adjust the leveling screws to
compensate for unevenness of the floor.
The front should be slightly higher than the
rear for better performance and to aid in
door closing.
Leveling screws can be turned easily by
tipping the cabinet slightly.
Turn the leveling screws clockwise (
raise the unit, counterclockwise (
lower it.
5. Don't install this appliance below 5 °. It may
cause the debasement of the refrigerator.
NEXT /
1. Clean your refrigerator thoroughly and wipe
off all dust accumulated during shipping.
2. Install accessories such as ice cube box, etc.,
in their proper places.They are packed
together to prevent possible damage during
shipment.
3. Connect the power supply cord (or plug) to
the outlet. Don't double up with other
appliances on the same outlet.
) to
) to
Inverter-On feature (Optional)/
Minimum Requirement: UPS / Inverter should
be in ON condition having minimum 600 VA
capacity along with minimum 120Ah capacity
battery connected with the refrigerator's power
supply socket.
12