echoflex Elaho Dual Tech Wall-mount Vacancy Sensor Installation Manual

Advertisement

Quick Links

Echoflex Installation Guide
Elaho Dual Tech Wall-mount Vacancy Sensor
Overview
The Elaho Dual Tech Wall-mount Vacancy Sensor uses passive infrared (PIR)
technology and acoustic detection to provide reliable vacancy sensing for
lighting control. The sensor relies on local station control for manual on and
provides auto off functionality upon detection of vacancy.
Sensor Coverage on page 11
See
Custom Configuration
This document guides you through the installation and local DIP switch setup
of the sensor.
For more detailed information about custom configuration options available
using ElahoAccess, see the ElahoAccess Mobile App integrated help system.
Note:
switch 2 must be enabled. See
Main Offic e
Squamish, BC, Canada
n
Email
info@echoflexsolutions.com
© 2018 Echoflex Solutions, Inc.
8186M2186
Revision A
Released 2018-09
n
n
The wall-mount unit offers up to 140 degree field of
detection with optimized lens options to accommodate
wide or narrow angle spaces and is available in white,
black or cream finish.
Wall-mount - Wide Angle Lens - coverage
60 ft (18.3 m) mounting height at 7–10 ft (2.1–3 m)
140 degree field of detection
Wall-mount - Narrow Angle Lens - coverage
16 ft (4.9 m) by 75 ft (22.9 m) coverage at mounting
height of 6–7 ft (1.8–2.1 m)
40 degree field of detection
To use the configuration settings applied using ElahoAccess, DIP
Toll Free +888 324 6359
n
Web
echoflexsolutions.com
n
Echoflex intends this document to be provided in its entirety.
n
.
DIP Switch Settings on page 7
Phone +778 733 0111
n
Product information and specifications subject to change.
n
.
Fax +604 815 0078
n

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Elaho Dual Tech Wall-mount Vacancy Sensor and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for echoflex Elaho Dual Tech Wall-mount Vacancy Sensor

  • Page 1 Elaho Dual Tech Wall-mount Vacancy Sensor Overview The Elaho Dual Tech Wall-mount Vacancy Sensor uses passive infrared (PIR) technology and acoustic detection to provide reliable vacancy sensing for lighting control. The sensor relies on local station control for manual on and provides auto off functionality upon detection of vacancy.
  • Page 2: Prepare For Installation

    The sensor may be installed into an industry standard back box (provided by others) or surface mounted back box (sold separately and available from Echoflex). Note: Installation must follow all national and local codes for electrical equipment.
  • Page 3: Control Wire Specification

    EchoConnect is a bidirectional protocol that uses one pair of wires (data + and data -) for both data and power. Echoflex recommends using Belden 8471 (or approved equal) Class 2 wire. The total combined length of an EchoConnect wire run (using Belden 8471, or equal) may not exceed 1,640 feet (500 m).
  • Page 4: Installation

    Echoflex Installation Guide Dual Tech Vacancy Sensor Installation Note: Follow all local code requirements for terminating wire. The wall-mount sensor is provided with a mounting bracket with pre-routed wires that can be mounted to a back box. Follow the detailed instructions for installation.
  • Page 5 Echoflex Installation Guide Dual Tech Vacancy Sensor Install the wall plate to the mounting plate. Align the top of the wall plate to the mounting plate, angling the bottom slightly. Hook the top of the wall plate to the tabs located on the mounting plate.
  • Page 6: Sensor Configuration

    Echoflex Installation Guide Dual Tech Vacancy Sensor Sensor Configuration The Elaho Dual Tech Wall-mount Vacancy Sensor participates in an Elaho control system using the configured Space and Address, which are selectable using the rotary switches on the sensor electronics located behind the removable cover.
  • Page 7: Dip Switch Settings

    Echoflex Installation Guide Dual Tech Vacancy Sensor DIP Switch Settings DIP switches on the sensor electronics provide for additional configuration options including Use Custom Config, Vacancy Timeout, Enable/Disable detection LEDs, PIR Only, and the ability to restore the sensor to its factory defaults.
  • Page 8: Power Up And Test

    Echoflex Installation Guide Dual Tech Vacancy Sensor Power Up and Test Power Up All EchoConnect terminations in the system must be made before applying power to the system and sensor. When the sensor is powered up, the PIR and acoustic detection LEDs illuminate for one minute for calibration and warm- up, then return to normal operation according to the configuration.
  • Page 9: Vacancy Timeout

    Echoflex Installation Guide Dual Tech Vacancy Sensor Vacancy Timeout Vacancy timeout is the amount of time the sensor waits to take action after no movement is detected. By default, vacancy timeout is set to 15 minutes (indicated by DIP switch 3 set to Off and 4 set to On; see...
  • Page 10 Echoflex Installation Guide Dual Tech Vacancy Sensor Walk Test The sensor offers a Walk Test mode, which shortens the vacancy timer to ten seconds and allows for simple and quick verification of the sensor’s coverage and range in the installed space.
  • Page 11: Sensor Coverage

    Echoflex Installation Guide Dual Tech Vacancy Sensor Sensor Coverage Narrow Lens Top View 77° (16ft) 21.5° 14° 2.5m 29° (8ft) 6.56° 2.5m (8ft) (16ft) Side View 2.1m (6.8ft) 10.7m 18.3m 30.5m 2.2m (3ft) (10ft) (35ft) (60ft) (100ft) (7ft) Dual Tech Wall-mount Vacancy Sensor Page 11 of 12 Echoflex Solutions, Inc.
  • Page 12 Echoflex Installation Guide Dual Tech Vacancy Sensor Wide Lens Top View 19.4° (33ft) (16ft) 140° (16ft) (33ft) Side View 2.1m (6.8ft) 7.7 m 4.6m 15.3m 1.7m (6ft) (15ft) (25ft) (50ft) Dual Tech Wall-mount Vacancy Sensor Page 12 of 12 Echoflex Solutions, Inc.

Table of Contents