Shimano E6000 Series User Manual page 11

Handling the battery
• When you carry a power-assisted bicycle in a car, remove
the battery from the bicycle and place the bicycle on a
stable surface in the car.
• Before connecting the battery, make sure that there is no
buildup of water or dirt in the connector where the
battery will be connected.
• The use of a genuine Shimano battery is recommended. If
using a battery from another manufacturer, make sure to
carefully read the instruction manual for the battery
before use.
Disposal information for countries outside
the European Union
This symbol is only valid within the
European Union. Follow local regulations
when disposing of used batteries. If you
are not sure, consult the place of purchase
or a bicycle dealer.
Cleaning
• The number found on the battery mount key is necessary
when purchasing spare keys. Keep it in a safe place.
There is a space to enter the key number on the back
cover of this user's manual. Enter the key number for
safekeeping and later reference.
• Contact the place of purchase for updates of the product
software. The most up-to-date information is available
on the Shimano website. For details, refer to the
"Connection and communication with the PC" section.
• Do not use thinner or other solvents to clean any of the
products. As such substances may damage the surfaces.
• You should periodically wash the chainrings in a neutral
detergent. In addition, cleaning the chain with neutral
detergent and lubricating it can be an effective way of
extending the useful life of the chainrings and the chain.
• Use a damp cloth, with the water well wrung out, when
cleaning the battery and plastic cover.
• For any questions regarding handling and maintenance,
contact the place of purchase.
• Products are not guaranteed against natural wear and
deterioration from normal use and aging.
• For maximum performance we highly recommend
Shimano lubricants and maintenance products.
Assist
• If the settings are not correct, for instance if the chain
tension is too tight, the proper assist force may not be
obtained. If this happens, contact the place of purchase.
<DU-E6010>
• This component is compatible with coaster brakes. If the
crank is not installed in the correct position or the chain
tension has not been correctly adjusted, contact the place
of purchase, as there may not be proper assistance
power.
Label
• Some of the important information contained in this
user's manual is also indicated on the battery charger
label.
5