Installing/removing a front bezel
This section describes how to install/remove a front bezel.
A front bezel (AU7705-Y/AU7705-R) is an optional product. Only when you
purchase a front bezel separately, the front bezel is delivered in a separate
package.
NOTICE
Installing a mounting bracket
Fix the mounting brackets with three screws to both the front tabs of the system
unit.
Figure 3-7: Fixing mounting bracket
Do not auto eject or remote eject the disc while a front bezel is attached
or the front door of the rack cabinet is closed. Do not attach a front bezel
or close the front door of the rack cabinet while the tray is open.
The tray can interfere with the front bezel or the front door and can
cause a failure.
Hitachi Compute Rack 220H Getting Started Guide
Installation
3-7