Advertisement
Model #
3501GACc
3501CAFc
McKenzie End
Table
GAC = Glazed Antique Cherry finish
CAF = Caffè finish
Assembly
Instructions
Thank you for allowing us to help you furnish your
home. We are certain you will be delighted with
your new furniture for many years to come.
If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a
replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you
cannot order replacement parts through your dealer, please contact our customer service department.
Customer Service: 800-653-3336 • Outside the U.S.: 541-687-0213
CUSTOMER SERVICE
Hours: Our friendly customer service staff can be reached:
Monday-Friday 8:00 a.m. to 5:00 p.m. (Pacific Time).
You may leave a message 24 hours a day, seven days a week.
Fax: 541-687-2060• Email: info@whittierwood.com
P.O. Box 2827
Eugene, OR 97402 USA
IMPORTANT NOTES:
• For normal household use only. Not recommended for commercial use.
• Do not climb, sit or stand on this piece of furniture.
• Unload items before you move this unit.
• Do not overload the drawers.
Drilling, sawing, sanding or machining wood products can expose you to
wood dust, a substance known to the state of California to cause cancer.
Avoid inhaling wood dust or use a dust mask or other safeguards for
personal protection.
For more information go to: www.p65warnings.ca.gov/wood
This product can expose you to chemicals, including formaldehyde,
which are known to the State of California to cause cancer.
For more information go to: www.p65warnings.ca.gov/furniture
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
Production Code:
VN
WARNING
03/17
Advertisement
Table of Contents
Related Manuals for Whittier Wood 3501GACc
Summary of Contents for Whittier Wood 3501GACc
- Page 1 If you ever have questions about your furniture, please do not hesitate to contact us. In the unlikely event you need a replacement part; we can make those parts available through an authorized Whittier Wood Furniture dealer. If you cannot order replacement parts through your dealer, please contact our customer service department.
- Page 2 3501GACc, 3501CAFc McKenzie End Table Parts List Please identify the parts and check that quantities received match those on this list. If you need to replace a part, refer to the following letter and part name. Part Description Quantity Case Assembly...
- Page 3 3501GACc, 3501CAFc McKenzie End Table Assembly Instructions Tools Required: Phillips Screwdriver, 9/16" or Adjustable Wrench Remove the Drawers (E) from the Case Assembly (Ac). To remove the drawers, pull up on the left side of the Drawer Release Lever while pushing down on the right Drawer Release Lever.
- Page 4 3501GACc, 3501CAFc McKenzie End Table Assembly Instructions Turn the table upright and insert the Drawers (E). Fig. 3 Place the table at its final destination. To level the table, rotate the Adjustable Glide (M) found at the bottom of each leg. See Figure 3.
Need help?
Do you have a question about the 3501GACc and is the answer not in the manual?
Questions and answers