Table of Contents
Advertisement
Chapter 5 PCI Bus Ethernet Interface
5.1 Introduction
The PCM-9340 is equipped with a high performance 32-bit Ethernet
chipset which is fully compliant with IEEE 802.3 100 Mbps CSMA/CD
standards. It is supported by major network operating systems. It is also
both 100Base-T and 10Base-T compatible. The medium type can be con-
figured via the RSET8139.exe program included on the utility disk.
The Ethernet port provides a standard RJ-45 jack onboard (CN6). The
network boot feature can be utilized by incorporating the boot ROM
image files for the appropriate network operating system. The boot ROM
BIOS files are combined with system BIOS, which can be enabled/dis-
abled in the BIOS setup.
5.2 Ethernet Driver Installation
Before installing the Ethernet driver, note the procedures below. You
must know which operating system you are using in your PCM-9340
Series, and then refer to the corresponding installation steps. You will
quickly and successfully complete the installation, even if you are not
familiar with instructions for MS-DOS or Windows.
Note:
PCM-9340 User's Manual
The windows illustrations in this chapter are
examples only. Follow the steps and pay atten-
tion to the instructions which appear on your
screen.
56
Advertisement
Table of Contents
