Table of Contents
Advertisement
Chapter 4 PCI SVGA Setup
4.1 Introduction
The PCM-9340 has an on-board LCD/VGA interface. The specifications
and features are described as follows:
4.1.1 Chipset
The PCM-9340 uses a SMI LynxEM+ 712G chipset for its SVGA con-
troller. It supports many popular 18-bit LCD displays and conventional
analog CRT monitors. The VGA BIOS supports LCD. In addition, it also
supports interlaced and non-interlaced analog monitors (color and mono-
chrome VGA) in high-resolution modes while maintaining complete IBM
VGA compatibility. Digital monitors (i.e. MDA, CGA, and EGA) are
NOT supported. Multiple frequency (multisync) monitors are handled as
if they were analog monitors.
4.1.2 Display memory
With 2MB shared memory, the VGA controller can drive CRT displays or
color panel displays with resolutions up to 1280 x 1024 at 256 colors.
4.2 Installation of the SVGA Driver
Complete the following steps to install the SVGA driver.
Notes:
PCM-9340 User's Manual
1. The windows illustrations in this chapter are
intended as examples only. Please follow the
listed steps, and pay attention to the instruc-
tions which appear on your screen.
2. For convenience, the CD-ROM drive is des-
ignated as "D" throughout this chapter.
3. When you are using a CRT display, please
make sure that your resolution settings (in the
BIOS setup) are the same as your VGA resolu-
tion settings (in Windows). Otherwise your dis-
play may behave strangely.
38
Advertisement
Table of Contents
