Figure 3.9:Set Password - EMAC PCM-9340F-0CA1 User Manual

To Disable Password
1. Choose the Set Password option from the CMOS Setup Utility
main menu and press <Enter>.
2. When you see "Enter Password," enter the existing password and
press <Enter>.
3. You will see "Confirm Password." Type it again, and hit <Enter>.
4. Select Set Password again, and at the "Enter Password" prompt,
don't enter anything; just press <Enter>.
5. At the "Confirm Password" prompt, again don't type in anything;
just press <Enter>.
Select Save to CMOS and EXIT, type <Y>, then <Enter>.
PCM-9340 User's Manual
Figure 3.9: Set Password
34