Installing Batteries; The Pro 3000 Probe - Fluke PRO3000 User Manual

Installing Batteries

To avoid electrical shock, turn the unit off and
disconnect its leads from any circuit before opening the
unit's battery door.
Use only 9 volt alkaline batteries (not included). Open the battery
compartment with a screwdriver to insert a new battery. Properly
attach the connection wires and close the compartment. Do not over
tighten the screw.
The P 3000 Probe
RO
The P 3000 probe is a highly sensitive inductive probe with
RO
amplified speaker, which makes signals transmitted by the P
toner audible. The non-metallic tip allows testing in distribution
blocks without disturbing other services (see Figure 1).
Though the tip is non-metallic, never touch the tip to
exposed power sources such as electrical outlets.
WX
Warning
WX
Warning
Figure 1. P
RO
The P
3000 Probe
3000 Probe
RO
3000
RO
bff01.eps
3