Introduction; Safety Information - Fluke PRO3000 User Manual

Introduction

The P 3000 Toner and P
RO
wires, and wire pairs. You connect the P
trace and follow the signal with the P

Safety Information

The following IEC symbols are used either on the test set or in the
manual:
W
Warning: Risk of personal injury. See the manual for details.
Caution: Risk of damage or destruction to equipment or
software. See the manual for details.
X
Warning: Risk of electric shock.
.
Earth ground
P
Conformité Européenne. Conforms to relevant European
Union directives.
)
CAN/CSA-C22.2 No. 60950-1-03
CAN/CSA-C22.2 No. 1010.1-92 + CSA-C22.2 No. 1010.1B-97,
UL/ANSI 3111-1
~
Do not put circuit boards in the garbage. Dispose of circuit
boards in accordance with local regulations.
This product is certified for indoor use only.
To avoid electrical shock, do not use the toner or probe if
they are wet. If they get wet, let them dry for 24 hours
before use.
3000 Probe helps you identify cables,
RO
RO
WX
Warning
3000 Toner to a line, then
RO
3000 Probe.
1